Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Towerpro MG996R Servo 25T 10kg / 0.20sec / 55g

Towerpro MG996R Servo 25T 10kg / 0.20sec / 55g

QTY:

Now save save $3.99 $3.99

Special Price $6.76 $6.76

You save save $3.99 $3.99

Was  $10.75

Rating:
Stock:
Weight:
79 g
SKU:
MG996R

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

This is essentially an upgraded version of the famous towerpro MG995 servo. It now has a redesigned PCB and IC controll system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwith and centering.
All specifications are the same as the previous model MG995, however this servo is far more accurate, and safe to use in aircraft which require precise servo movements and perfect centering.

Weight: 55g
Dimension: 40.7*19.7*42.9mm
Stall torque: 10kg/cm
Operating speed: 0.20sec/60degree(4.8v)
Operating voltage: 4.8-7.2V
Temperature range: 0_ 55
Servo Plug: JR (Fits JR and Futaba)
Spline Count: 25



Product
Specifications

Additional Information

  • SKU:
    MG996R
  • Brand:
    No
  • Weight(g)
    79.00
  • Length
    106.00
  • Width:
    19.00
  • Height:
    78.00
  • Speed (Sec/60deg)
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Unit Weight (g):
    N/A
  • A(mm):
    No
  • B(mm)
    No
  • C(mm)
    No
  • D(mm):
    No
  • E(mm):
    No
  • F(mm)
    No
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

playlist_add_check Overall
trending_up Value
verified_user Quality
This is an great servo for the price with a good amount of torque and a solid build. I used it for a Robot Arm and it works better than expected.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
This is an excellent servo for the price with a good amount of Torque. I used this in a Robot Arm and it has performed beyond expectations.
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
playlist_add_check Overall
trending_up Value
Klasse Standard Servos. Fliege sie seit zwei Jahren in einer 2,7m Piper mit recht ruppigem NGH 38 four stroke. Keine Probleme oder Ausfälle. Vorsicht vor den Plagiaten/Fakes, habe woanders schon mal welche erwischt, konnte sie nur entsorgen. Also am besten hier bei HK kaufen und alles ist gut!
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
Klasse Standard Servos. Fliege sie seit zwei Jahren in einer 2,7m Piper mit recht ruppigem NGH 38 four stroke. Keine Probleme oder Ausfälle. Vorsicht vor den Plagiaten/Fakes, habe woanders schon mal welche erwischt, konnte sie nur entsorgen. Also am besten hier bei HK kaufen und alles ist gut!
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
trending_up Value
playlist_add_check Overall
Sehr gutes Servo, habe viele in Flug-Grossmodellen in Betrieb, keine Ausfälle. Ganz wenige (vlt 2pcnt) haben überlaufen vom Nullpunkt (kurzes Pendeln). Habe das MG996R vermessen: tatsächlich 9,6 bis 9,8 kg/cm bei 6 Volt. Reicht für fast alle Anwendungen. Und das zu diesem Super Preis!
Aber Achtung: woanders werden oft TowardPro MG996R angeboten - sehen fast genauso aus, sind aber nicht digital, viel schwächer, und haben öfter Ausfälle! Der Abtrien ist ein Messing (goldener) Vielzahn. Hände weg von TowardPro!
Die echten Tower Pro haben den Namen oben ins Gehäuse gestanzt, und einen alufarbenen Abtrieb. Trotz ähnlichem Preis riesen Qualitätsunterschied!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received four of these servos last week. One with a brass spline drive and three with a steel spline drive. The horns fit the brass spline well, but it's a very poor fit on the steel spline. I needed to use the screw to get them fitted and they're not coming off again in a hurry! I don't know if the steel drive is an old or new version
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use 7 of these servos on my Ultimate 50cc and 3 on my Carl Goldberg Ultimate .60, and only one of them gave some problems with centering.
Not all the servos have the same resolution or the same centering but giving them different setup values on the transmitter the problem is fixed. Great torque. Good value for money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Trs bons servos que j utilise depuis quelques annes sans problme .Converti l' lectrique ils quipent un cassut racer au 3.7.trs satisfait merci HK.
Very good servos that I used for several years without problems thank you HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have brought six of these servos and used them in a 50cc sized extra servos centre well and are strong .Metal gears and case are good quality will be purchasing more
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Towardpro...not Towerpro servos will destroy your plane...lots of overshoot. If you are going to buy these then please send me the money for the servos and toss your plane in the bin. The end result will be the same.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.