TrackStar performance now comes in an easy to select combo package!
Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar 18A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. Combined with the quality 4 pole motor this translates in to very smooth start up and acceleration and torque.
The Turnigy TrackStar 18A ESC also boasts a host of programing options not usually found in an ESC of this size and can be programmed with ease via the Turnigy TrackStar programing card (sold separately)
Cont. Current: 18A
Burst Current: 25A
Car Size: 1/18th
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
L-BEC: 5V / 1A Output
Motor Type: Sensorless Brushless
Size: 30 x 26.1 x 13.8mm
Weight: 26g (Including wires)
Motor Plugs: 3.5mm Bullet type
Battery Plug: Required
On/Off Switch: Yes
KV value: 4300KV
Motor length: 37mm
Extend shaft diameter: 2mm
Length of extend shaft: 11±0.5mm
No loading @ 7.2V: 1.8A
Max current: 30A
Resistance (Ω): 0.037Ω
Battery range: 2~3s 7.4v~11.1v
Operation Temperature: 80°
Max Temperature 130°
Suitable car scale: 1/18
Suitable ESC: 25A
Thickness of lamination: 0.2X20mm
- Blade Count:
This combo makes for 1/16 Brushless 4WD Mini Rally - Extreme Edition?Nice little system. Almost too cute to use!,Made my former brushed 1/18 car go mental! Love it! :)Awesome little power plant, got this to put in my nephew's mini recon, had to modify the chassis slightly but it wasn't a very big job, you will also require a couple of m2.5 screws for mounting the motor as the stock screws are m3 and none are supplied with the motor.
Performance is excellent and 2s is more than enough for the tiny recon.zestaw idealny do x-modulall i can say is !!WOW!!. With little modification this fits into a team associated RC18T2 with TONS of power!!!!! This is a VERY POWERFUL brushless motor ,runs very cool. RECOMENDED :D
-_-It took only one week and half to receive my Trackstar combo.
Its an awesome ESC fully programable from TT to TC and Crawler with the drag brake, the 14T Motor provides plenty of power for my Mini Losi Baja Bug do wheelies on the beach sand.
I would buy it again, very good product.I have a 1/16 HSP Short Coarse Truck brushed. Will this be a straight foward fit & if yes what pinion would i need?
Cheersthis is a great product for 1/18th scale racing mine is going on to a rc18r I like the smooth start up and smooth throttle response that you get with this package if geared right of course! good for carpet/asfault rating and in my opinion 4300kv is plenty im even racing against guys using 9000kv motors and 3s lipos im just using 2s but its plenty fast!installed it on a RC18B2, bolt pattern did not line up with motor mount plate. Drilled an extra hole in there, mounted the motor, and it works great. Great value, to early to say anything on quality. Please note that you can program the ESC without the programming card, but it is not very easy.