TrackStar D-Spec 7.5T Sensored Brushless Drift Motor
TrackStar D-Spec 7.5T Sensored Brushless Drift Motor
Copy and Share the Below URL
TrackStar D-Spec Sensored Brushless Drift Motor!
The TrackStar D-Spec Sensored Brushless Drift Motor comes in 3 different windings; 10.5T, 8.5T and 7.5T. Perfect choice for for different tracks, from technical to high speed layouts.
The TrackStar D-Spec Sensored Brushless Drift Motors feature a turbo fan blade which will suck in cool air into to the core of the motor, this will help keep a lower tempeature even at full thorttle. The turbo fan blade will also create a great sound when spooling up the motor, simulating a real car engine.
The TrackStar D-Spec Sensored Brushless Drift Motor uses a Sintered Neodymium Magnet which will generate a powerful magnetic force that will make the motor have a better torque output, this makes the drift action easier and more controllable to use.
Features:
• Sensor-Based for advance timing set-up
• Adjustable Timing
• Turbo fan blade attached to the rotor for cooling and real engine sound simulation
• Special designed motor can for weight reduction, better cooling and louder sound
• High Purity Copper Windings
• Powerful Sintered Neodymium Magnets for better torque output
• High Power Solder Tabs
• Removable/Replaceable Rotor
*Note: Sensor cable included
Specs:
Can Size: 540
Turns: 7.5
RPM/v: 4700kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 3.7V(1S)~11.1V(3S)
Max Current: 86A
Max Watts: 360W
Can Diameter: 36mm
Can Length: 51.5mm
Shaft Size: 3.175mm
Weight: 160g
-
Kv(rpm/v) 4700.00
-
Max Current (Motor) (A) 86.00
-
Resistance (mh) 0.00
-
Max Voltage (V) 11.00
-
Power (W) 360.00
-
Shaft A(mm) 3.18
-
Length B (mm) 55.00
-
Can Diameter C(mm) 36.00
-
Can Length D(mm) 40.00
-
Total Length E(mm) 71.00