The Turnigy TrackStar One Cell 1/12th ESC is the latest addition to Hobby Kings Sensored Car ESC range.
The TrackStar One Cell features a built in voltage booster for single cell Lipoly use in 1/12th scale racing.
Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar One Cell 120A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. This translates in to very smooth start up and acceleration.
Timing Indicator LED
To conform with ROAR's Sportsman Class racing rules and assist race organizers monitor driver compliance in non-timing modified race classes the TrackStar 1/10th ESC includes a timing mode indicator LED. At all times when the ESC is powered on and dynamic motor timing is set to a value greater than zero the white LED will illuminate indicating that the timing mode has been modified.
The Turnigy TrackStar One Cell 120A ESC also boasts a host of programing options not usually found in an ESC at this price and can be programmed with ease via the Turnigy TrackStar programing card (sold separately).
• Programmable via Turnigy TrackStar programing card (sold separately)
• Firmware can be updated via PC
• 10 throttle profile memory slots. Can be exported through PC
• Timing Indicator LED (Blinky Mode)
• ESC Overheat Protection
• Adjustable Boost and Turbo Timing
• Adjustable Brake and Drag Brake
• Laminated copper stack design efficiently dissapates heat
• Built-in electronic switch is compact and reliable
• "Blinky" Mode (non-timing mode)
Constant/Burst Current: 120A / 760A
Motor Compatibility: Brushless sensored and sensorless
Car Compatibility: 1/12 onroad competition
Motor Limits: >3.5T (3 slots, 2 poles, 540 class motor)
Battery Cell Count: 1S 3.7V LiPoly
BEC Output: 6V @ 1A, linear
Weight: 41g (without wires)
Now officialy approved by ROAR and BRCA for race use! (To use in those racing series, please download the USB link v1.10 and update the ESC firmware to v2.02)
*Note: Above is a list of some of the key programming options. Many more options are available when used with the PC software (TrackStar Multi-Function Smart Program Box required). See user manual located under the "Files" tab below for full details. TrackStar Link PC software also available for download under the "Files" tab.
cant beat them for price and performanceI have 3 and this has become std at my club, GT12 and LMPArrived and installed in the car, runs just as good as the other pricey named brand I was running if not better on the stock settings, will get the program box to tune up the settings for my low turn motor, and adjust the brakes. Probably will get another just as a spare for another car.run it top sportsman drag racing was running cc best tuned time 2.47 put genll to in box stock ran 2.40 tuned it for drag racing have ran a best 2.32 went from also ran to one the faster cars with this esc now I have 3 of them grandsons top sportsman going to try it in pro stock this weekend great esc and great service from hobbykingI have been racing 1/12 scale for many years now. I have used every speed control known to man. This speed control equals or tops everything out there the regular racer could get his hands on. Buy the new program box for $9.00, set the speed control and forget it. BEC works great, would just like to see the caps made a bit smaller. For the price buy 2 and have a backup, in my case buy a world GT car and slap in your backup and go racingworks perfectly, buy this if you buy the gt10x pan car and the 3.5t brushless.Great esc for oval pan car racing. Has a nice small footprint and eliminates that pesky receiver pack, that you no longer have to worry about charging. I would personally solder on 14 awg wire instead of the 12 awg that comes with it to make it a bit more flexible. Using it on the blinky firmware as well.great ESC works great. I will be buying more.Waste of time to order this. Mine won't work in blinky mode. And you can't get the programming card that works for this item, only one that doesn't work.this esc has given me a very very hard time,, have the program box with the 2.02 on it.. and the esc still stalls when i pull the throttle ??? i did every thing i could do.. do i need a DC booster with this esc ,,,, if not.. thats it I done with this P.O.S. how do i send it back...???