New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

TrackStar ROAR approved 1/10th Stock Class Brushless ESC and Motor Combo (17.5T)

TrackStar ROAR approved 1/10th Stock Class Brushless ESC and Motor Combo (17.5T)

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$74.86
Status:
In Stock
SKU:
9192000196-0
WANT FREE SHIPPING? Click here to find out more!

To celebrate the TrackStar 1/10th 80A Turbo brushless ESC and Motor receiving ROAR approval, HobbyKing are now introducing the TrackStar ROAR approved 1/10th Stock Class Brushless ESC and Motor Combo set!

The ESC features a CNC alloy case top which incorporates the heatsink for the Mosfets, neat terminal cups for both the battery input and ESC output cables. The ESC software has a large number of user programmable settings such as punch, initial brake, drag brake, boost timing RPM, boost timing, Turbo timing, Turbo delay, Turbo ramp, boost acceleration - allowing this ESC to be customised in nearly every way you could ever need for 1/10 scale on or off road racing!

The motor features a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

ESC Specs:
Max Voltage: 2S Lipoly / 6 cell NiMH
Motor limit: 10.5T
Resistance: 0.0004 ohm
Operating current: 80A
Burst Current: 380A
Bec Current: 3A
Bec Voltage: 6V
"Blinky" mode (Non-timing mode): Yes

Programming Options:
Operation Mode: Forward/Brake/Reverse; Forward/Brake Only
Initial Brake: 10% ~ 80%
Drag Brake: 0% ~ 40%
Brake Strength: 50% ~ 100%
Voltage Cutoff: None ~ 3.5V/cell
Punch Profile: Level 1 ~ 9
Neutral DeanBand: 1% ~ 8%
Boost Timing: 0deg ~ 60deg
Turbo Slope: 3deg/0.1s, 6deg/0.1s, 12deg/0.1s, 18deg/0.1s, 24deg/0.1s, Fastest
Turbo Timing: 0deg ~ 30deg
Boost Timing RPM: 2000 ~15000
Turbo Delay: Off, 0.05sec, 0.1sec, 0.15sec, 0.2sec, 0.25sec, 0.3sec, 0.35sec, 0.4sec
Boost Timing ACC: 50RPM/deg ~ 700RPM/deg
Reverse Speed: 25% ~ 100%
Drive Frequency: 8Khz, 16Khz, 24khz
Brake Frequency: 1,2,4,8,16Khz
Temperature protection: On/Off
 
Motor Specs:
Can Size: 540
Turns: 17.5
RPM/v: 2270kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 28A
Max Watts: 190w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
Weight: 178g
 
Includes:
ESC x 1
Motor x 1
Sensor wire
TrackStar Sticker
Manual

Now officially approved by ROAR for 17.5 spec stock class race use!

  • SKU 9192000196-0
  • Brand TrackStar
  • Shipping Weight 380.0000
  • Length 140.00
  • Width 45.00
  • Height 100.00
  • Kv(rpm/v) 2270.00
  • Max Current (A) 28.00
  • Resistance (mh) 46.00
  • Max Voltage(V) 8.00
  • Power (W) 190.00
  • Shaft A(mm) 3.17
  • Length B (mm) 53.00
  • Diameter C(mm) 36.00
  • Can Length D(mm) 34.00
  • Total Length E(mm) 67.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hello, I can not pair with a transmitter so that the car was going forward.
The problem is that the vehicle is still moving backwards on the gas forward.
You can rotate the direction of rotation of the engine, so the car to run as it should?

Otherwise, I expect the exchange differential, or change the location of the engine. Neither is completely technically possible.
Thank you

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Hello, I can not pair with a transmitter so that the car was going forward.
The problem is that the vehicle is still moving backwards on the gas forward.
You can rotate the direction of rotation of the engine, so the car to run as it should?

Otherwise, I expect the exchange differential, or change the location of the engine. Neither is completely technically possible.
Thank you

Hello, I can not pair with a transmitter so that the car was going forward.
The problem is that the vehicle is still moving backwards on the gas forward.
You can rotate the direction of rotation of the engine, so the car to run as it should?

Otherwise, I expect the exchange differential, or change the location of the engine. Neither is completely technically possible.
Thank you

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Hello, I can not pair with a transmitter so that the car was going forward.
The problem is that the vehicle is still moving backwards on the gas forward.
You can rotate the direction of rotation of the engine, so the car to run as it should?

Otherwise, I expect the exchange differential, or change the location of the engine. Neither is completely technically possible.
Thank you

plenty of speed to do all the jumps/obstacles at my local track. very smooth power to get consistent lap times while feeling in control. performance is a 5 star imo, but sensor harness did not last long. cheap to replace and happy enough to order up a second combo for my car. i go faster with this 17.5 than i do with my 13.5 cause its easier to drive.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

plenty of speed to do all the jumps/obstacles at my local track. very smooth power to get consistent lap times while feeling in control. performance is a 5 star imo, but sensor harness did not last long. cheap to replace and happy enough to order up a second combo for my car. i go faster with this 17.5 than i do with my 13.5 cause its easier to drive.

This combo works fine and smooth in my Tamiya CR-01 crawler. The red anodised aluminium finish looks very cool shining through the chassis. Programming with the programming card Produkt ID: 9192000049 is just fun. Will buy some more for next projects.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This combo works fine and smooth in my Tamiya CR-01 crawler. The red anodised aluminium finish looks very cool shining through the chassis. Programming with the programming card Produkt ID: 9192000049 is just fun. Will buy some more for next projects.

Good combo include cble sensor for my basher nitro circus 4x4 short course.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good combo include cble sensor for my basher nitro circus 4x4 short course.

I'm sure this is a great combo, but I find it quite annoying that the ESC has a multitude of programmable options (brake force, reverse, timing, boost etc.) but you can't get at any of them without buying the programming card. That's right, there's way to program with the use of 'beeps' through your transmitter. Between planes and cars, I now have a total of about 8 different programming cards; each one not compatible with the next. They should make a single USB dongle that works with software to program all these different ESC's. Not only do I now have to spend another $15 or so on yet another programming card, but I have to wait for it to arrive. At a minimum, the description should make it clear that you can only use the default settings unless you buy the programming card.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm sure this is a great combo, but I find it quite annoying that the ESC has a multitude of programmable options (brake force, reverse, timing, boost etc.) but you can't get at any of them without buying the programming card. That's right, there's way to program with the use of 'beeps' through your transmitter. Between planes and cars, I now have a total of about 8 different programming cards; each one not compatible with the next. They should make a single USB dongle that works with software to program all these different ESC's. Not only do I now have to spend another $15 or so on yet another programming card, but I have to wait for it to arrive. At a minimum, the description should make it clear that you can only use the default settings unless you buy the programming card.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save