Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • USA

Traker 3D Ultra-light 3D 95% ARF w/ motor & ESC

Traker 3D Ultra-light 3D 95% ARF w/ motor & ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
1989 g
SKU:
Traker-3D
Product
Description
Traker 3D light-weight indoor or parkflyer.
Made from ultra-light KT board this 3D plane has excellent aeobatic and 3D capability.
The plane is 95% factory-built and will have you flying in 3 hours or less and uses only top-quality precision cut foam to ease installation and reduce workshop time. Included is all hardware required. All you need is a receiver and battery. 
Ultra light 3D indoor or out!

Specifications:
Fuselage Length : 885 mm / 34.8 in
Wingspan : 900mm / 35.4 in  
Wing Area : 350 sq in / 22.5 sq dm
Flying Weight : 260g / 9.2 oz - 305g
Propeller : 1047 slow flyer prop
 
Included :
Motor : 2208/34 Brushless outrunner motor
ESC : 20A
Servos : 4 x 6g
 
See the thread and video on our forum;
http://myhobbycity.com/showthread.php?t=3527
 
Product
Specifications

Additional Information

  • SKU:
    Traker-3D
  • Brand:
    N/A
  • Weight(g)
    1989.00
  • Length
    975.00
  • Width:
    115.00
  • Height:
    230.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I'm looking to buy a 3D plane but don't know which 1 yet.

Everyone is saying change the servo's but too what size.???

Second what size carbon fiber rod u suppose to buy to support the fuselage.?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As previously reported the kit arrived in good condition . Well packed and no damage.The plane assembled very easily.I didn't use ca glue but used expoxy both 5 minute and the super strength longer drying.The only problems I came accross were the vertical stab needed reshaping,the decorations on the wing didn't match up with the ailerons when fitted and one rudder/elevator support was missing from the kit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Much nicer than a profile foamy. Its really light and should be able to hover at 1/2 the cost of my Acromaster. Some fuze compression damage also on this one. I am doing a removable wing by doubling up the center region with 1/16 balsa - its a bit fiddly as there isn't any material to work with - just glue it and fly it would be easier. - Order some foam safe CA with the kit and some kicker if you don't have any. - wozz
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a superb little model. I relplaced the servo's as I didn't think the supplied ones would be reliable. I use the 1000mah 2S 15C battery. The body deck is a little flimzy though
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excllent plane. Tracks like a glow without wind. Just change the stock servos and you can do whatever you want with this baby!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived with a minor damage to the wing, but nothing serious. Really easy to assemble. One servo broke before flight, so had to replace it. The motor mount area is really weak, so i sugest you streghten it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pro:

nice hoover, plenty of power for anything

easy assembly

very predictable flight

cons:

very bad included servos

weak horizontal stabilisator - just add carbon fiber rod, an its ok

very weak cabin cover, i flew without it, plane looks good :)

weak tail wheel ( but who need it :) )



overall, great plane, if you change servos.



I flew with 2s 800mAh battery, and the performance is simply great
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received package today, 7 days after order. Very well packed, damages are just impossible. Quality surprised me, prepare to flight will take me few hours. Now i wake still for charger and battery (from HK too) and I am looking forward to first flight!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my kit today along with some other items in the box.This is the first kit I have ordered from Hobby City and was worried what sought of condition it would arrive in.I need not have worried as it was so well packed with padding on everything.Fantastic. Good one Hobby City.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I too would recommend that you fly like a very nice and all that comes with good used equipment, satellite and was working well.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.