New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy 10XC 10S 400W 10A Dual Channel Balance Charger

Turnigy 10XC 10S 400W 10A Dual Channel Balance Charger

Discontinued Product

Please continue searching for a similar product.
SKU:
9214000004
WANT FREE SHIPPING? Click here to find out more!

The ALL NEW Turnigy 10XC is designed to provide a whopping 10A max current output, and 400W of power (rated @30V DC input when charging a 10s Lipoly battery) - all while maintaining a compact size, and available at an extremely competitive price. You will be hard-pressed to find a safer, faster, more-complete solution to meet your charging needs in the 400W class. Supporting manual charge currents up to 10A or AUTO Charge rates (1.0C, 2.0C, and 3.0C), the 10XC is capable of safely charging one or two lithium battery packs simultaneously. Add to this new features like Multi-Chemistry support (the 10XC can charge Li-XX, A123 (LiFePO4), NiCd, NiMH, and Pb battery types), auto charge or discharge to storage levels (Li-XX only), 10 user-configurable presets, and you really start to get an idea of how much value is packed into this high quality charger.
 
Features:
Capable of up to 10A charge rates and 400W total charging power
Dual output channels allow for charging two batteries simultaneously
1~10S Li-XX charging capability
Multi-Chemistry battery support (Li-XX, LiFePo4, NiCd, NiMH and PB)
Plug and play Li-XX charging
10 user-configurable presets
Compact case design

Measurement accuracy:
Voltage resolution: 78uV (16 bit)
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity (“Fuel”): +/- 10% (with accurate fuel table defined in preset)

Spec.
Input Voltage: 10~32VDC
Circuit power: Max Charge: 400W / Max Discharge: 42W
Charge Current Range: .1~10A
Discharge current range: .1~5.0A
Ni-MH/NiCd cells: 1~28
Li-XX cells: 1~10
Dimensions: 174 x 93 x 43mm
Weight: 613g

Note:
Balancing boards are sold separately. Please see related products below. Two adapter boards for your brand of battery will be required for 10s charging.

  • SKU 9214000004
  • Brand Turnigy
  • Capacity (mAh) -
  • Shipping Weight 879.0000
  • Packaging Length 250.00
  • Packaging Width 50.00
  • Packaging Height 150.00
  • Turnigy 10s 600w Charger
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I am delighted with this charger. It takes a while to figure out how to make changes to the factory presets, but from then on it is great. I especially like knowing the cell internal resistances. You can easily spot what's causing packs to go bad. However, since I charge 5S-5000mah packs 90pcnt of the time, having to use the connection boards became a hassle. I cut off the lead from the JST-EH side of the board to the charger and made a long extension, using two 5S extensions and now I can reach my battery pack balance connectors easily. I wish that the charger was sold with the long extensions I made.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am delighted with this charger. It takes a while to figure out how to make changes to the factory presets, but from then on it is great. I especially like knowing the cell internal resistances. You can easily spot what's causing packs to go bad. However, since I charge 5S-5000mah packs 90pcnt of the time, having to use the connection boards became a hassle. I cut off the lead from the JST-EH side of the board to the charger and made a long extension, using two 5S extensions and now I can reach my battery pack balance connectors easily. I wish that the charger was sold with the long extensions I made.

Pretty nice small charger. Easy to use, however the number of presets is poor. It is not complete dual channel - I would like to say that sometime you can charge two battaries.
do not forget two bye TWO balancing boards

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty nice small charger. Easy to use, however the number of presets is poor. It is not complete dual channel - I would like to say that sometime you can charge two battaries.
do not forget two bye TWO balancing boards

Operation: After problems were resolved, it performed great, charging both turnigy 2S 5800mah nanotech in a very short time at 10A (input voltage at this time was 17.7v according to charger), after balance all sells @ 4.20v. I did a storage cycle after this and and it took rather long since it only discharges for starage at 1A! anyway, after storage cycle complete all sells were at 7.79v.

After charging: Power supply and charger slightly warmer then room temperature, they operate quietly with the fans only engaging every now and again. Batteries where cold to the touch. after both charge and storage (discharge) cycles.

Conclusion: Highly recommended. This is a great charger and I think it offers good value. Make sure you understand the manual (same as xellpro 10XP )before operation.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Operation: After problems were resolved, it performed great, charging both turnigy 2S 5800mah nanotech in a very short time at 10A (input voltage at this time was 17.7v according to charger), after balance all sells @ 4.20v. I did a storage cycle after this and and it took rather long since it only discharges for starage at 1A! anyway, after storage cycle complete all sells were at 7.79v.

After charging: Power supply and charger slightly warmer then room temperature, they operate quietly with the fans only engaging every now and again. Batteries where cold to the touch. after both charge and storage (discharge) cycles.

Conclusion: Highly recommended. This is a great charger and I think it offers good value. Make sure you understand the manual (same as xellpro 10XP )before operation.

Review repost (2 part).

Quality out the box: seems very good, nice screen and easy to read. Menu options easy to understand and navigate with a lot of nice features. There are rumors that this is a rebranded cellpro XP, i believe it, although detuned to only deliver 10A max, not 15A.

Paired with: Two jst-xh balance boards and a 540w 18v hobbyking Power supply. (NOTE: does not come with discharge leads).

Problems: Initially had a problem "Ch1 bad S. Count" when trying to charge 2x 2S turnigy nanotech batteries on eboth channels using preset 1 or 2. Turns out after some investigation and with help from HK support, the balance boards convert the jst-XH wiring to the default node automatically, so if you are trying to charge jst-xh plugs using the turnigy, you must NOT set your charger wiring node to XH- KEEP IT IN DEFAULT (even though the manual says jst-xh should use XH wiring node). Also check that all the balance plugs wires are in properly, I got a "Ch2 Bad S. count" due to one not being seated properly while trying to discharge.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review repost (2 part).

Quality out the box: seems very good, nice screen and easy to read. Menu options easy to understand and navigate with a lot of nice features. There are rumors that this is a rebranded cellpro XP, i believe it, although detuned to only deliver 10A max, not 15A.

Paired with: Two jst-xh balance boards and a 540w 18v hobbyking Power supply. (NOTE: does not come with discharge leads).

Problems: Initially had a problem "Ch1 bad S. Count" when trying to charge 2x 2S turnigy nanotech batteries on eboth channels using preset 1 or 2. Turns out after some investigation and with help from HK support, the balance boards convert the jst-XH wiring to the default node automatically, so if you are trying to charge jst-xh plugs using the turnigy, you must NOT set your charger wiring node to XH- KEEP IT IN DEFAULT (even though the manual says jst-xh should use XH wiring node). Also check that all the balance plugs wires are in properly, I got a "Ch2 Bad S. count" due to one not being seated properly while trying to discharge.

Other stores will force you to ship the product back to China in full retail packaging every time!

Hobbyking's warranty service is professional, fair and fast.

Where has my review gone?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Other stores will force you to ship the product back to China in full retail packaging every time!

Hobbyking's warranty service is professional, fair and fast.

Where has my review gone?

Customer files
Turnigy 10XC Firmware Update Utility Download [14]
10XP User Guide Download [523]
Turnigy 10XC User Manual Download [313]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save