Country
United States
 
Shipped From:
  • UK
  • Australia (AUS)
  • EU

Turnigy 1811 Brushless Motor 2000kv

Turnigy 1811 Brushless Motor 200...

Specs:
Dimension: 21.4mm x 17.6mm, 30mm (with shaft)
Weight: 11g (kv2000) (not including connectors)
Diameter of shaft: F1.9mm
Length of front shaft: F8.1mm
Lamination thickness: .2mm
Magnet type: 45SH
...
T1811-2000

Now save save $0.00 $0.00

$12.55
38g
T1811-2000


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

Specs:
Dimension: 21.4mm x 17.6mm, 30mm (with shaft)
Weight: 11g (kv2000) (not including connectors)
Diameter of shaft: 1.9mm
Length of front shaft: 8.1mm
Lamination thickness: .2mm
Magnet type: 45SH

Max performance:
Voltage: 2S
Max current: 3.2~4.1A/20S
Prop: 6x3~7x3.5
Pull: 150~165g
Suits: ~150g indoor flyer

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    T1811-2000
  • Weight(g)
    38.00
  • Length:
    65.00
  • Width:
    40.00
  • Height
    40.00
  • Kv(rpm/v)
    No
  • Max Currents (A):
    No
  • Power (W):
    No
  • Length B (mm)
    No
  • Can Length D(mm)
    No
  • Max Voltage(V):
    No
  • Shaft A(mm):
    No
  • Unit Weight (g)
    11
  • Diameter C(mm)
    No
  • Total Length E(mm):
    No
  • Resistance (mh):
    No
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Great motor can run 6x5 sf on 2 or 3 cell

under 6amp.
Great motor! Im running a 6x5 sf prop on 2 and 3 cell at 5amp max.
Gewicht 10,76g mit 4cm Kabel und Motortraeger,

Laenge 30mm inkl Motortraeger und Motorachse

Durchmesser 18mm

freie Achse 8,3mm

umfangreiches Zubehoer (Bild)

Befestigungsloecher 16mm Traeger Aussendurchmesser 21mm

sehr guter Gesamteindruck
Please pay attention to the screw on the yoke. It like to loosen itself while flying. Fasten it whit use of thread glue.
Low cost, light weight motor. Perfect for small parkflyers and indoor planes up to 230g weight.
Gewicht 10,76g mit 4cm Kabel und Motortraeger,

Laenge 30mm inkl Motortraeger und Motorachse

Durchmesser 18mm

freie Achse 8,3mm

umfangreiches Zubehoer (Bild)

Befestigungsloecher 16mm Traeger Aussendurchmesser 21mm

sehr guter Gesamteindruck
These are good motors! I run them on a Hex with 5030 props on 3S at the moment. I will warn you all to tighten up the screws before you attempt to fly or you might find yourself with the bell end flying off mid flight. (no it's not happened to me yet) ;)
this little motor works great with a 6x3 prop. dont have any way to measure thrust but it will pull my 110 gram foamy straight up. can't wait to try it with a 7x3.5

Also extremely smooth and quiet
lots of mixed reviews for the 1811 range.. but I am finding them all good.. on this one I am using on a 300 nanotech 2s with a 7x3.5 gws prop , it gives about 120-130 gms thrust.. drawing just under 3A, so likely I can prop it up a bit.. however this is enough to fly my 130gm biplane about with a reasonable flight time and performance..
Super petit moteur avec hlices 5030 pour mon petit quad micro pcb integre et carte KK v2 avec lipo 7,2 v, par contre les supports hlices en cne provoque des vibrations
View all reviews
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
rust can and bad magnet download now [110kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.