New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy 3 Channel Servo Speed/Direction Regulator

Turnigy 3 Channel Servo Speed/Direction Regulator

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$9.38
Status:
In Stock
SKU:
TSSR-3
WANT FREE SHIPPING? Click here to find out more!
A fully adjustable 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model retracts flaps and canopies where scale detail and flight characteristics are important. No more ((boing!)) cartoon like landing gear action.
Weight: 3g
Input: 1 servo Channel.
Output: 3 Channels.
Options: Travel Speed & Travel Time in both directions.
 
  • SKU TSSR-3
  • Brand Turnigy
  • Capacity (mAh) -
  • Shipping Weight 15.0000
  • Packaging Length 102.00
  • Packaging Width 5.00
  • Packaging Height 65.00
  • http://youtu.be/coIhxt_WRUw
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 2 TSSR-3 Turnigy 3 channel servo speed regulators and I want to inform you that the labels on the regulators are backwards from the instructions that came with the device. If you hook them up according to the label printed on the regulator, THEY WILL NOT WORK!
If you hook the signal wires (servos) to the regulator according to the figure printed in the instructions, they will work.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

I bought 2 TSSR-3 Turnigy 3 channel servo speed regulators and I want to inform you that the labels on the regulators are backwards from the instructions that came with the device. If you hook them up according to the label printed on the regulator, THEY WILL NOT WORK!
If you hook the signal wires (servos) to the regulator according to the figure printed in the instructions, they will work.

Bought 3 units after trying one out. Original worked fine but new order all three not working if connection label followed. Then connected as per the first one I had used. Was close to returning but guessed at quality error! Beware. Otherwise they work as expected on flaps.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Bought 3 units after trying one out. Original worked fine but new order all three not working if connection label followed. Then connected as per the first one I had used. Was close to returning but guessed at quality error! Beware. Otherwise they work as expected on flaps.

Wont work on retracts, to much current draw by the servo for it to slow it down, just stops if you try to slow it.
only works one way on flaps, sadly on the up and not the down.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wont work on retracts, to much current draw by the servo for it to slow it down, just stops if you try to slow it.
only works one way on flaps, sadly on the up and not the down.

Doesn't work for on servoless retracts all you get is a delay in movement no speed control at all. What I ended up doing was running a split lead to the rx, one direct to one retract so works at normal speed and then the other retract lead to this unit and adjusted the delay - as there is no speed control as such, so looks like on leg is coming up slower - its in a Spitfire so gives the effect but a little bit disappointed, or am I missing something!! Electronics not my strong point!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Doesn't work for on servoless retracts all you get is a delay in movement no speed control at all. What I ended up doing was running a split lead to the rx, one direct to one retract so works at normal speed and then the other retract lead to this unit and adjusted the delay - as there is no speed control as such, so looks like on leg is coming up slower - its in a Spitfire so gives the effect but a little bit disappointed, or am I missing something!! Electronics not my strong point!

I really love these & regularly add one to my International orders - I now have about a dozen installed in a range of models!...... They provide brilliant, realistic slow transition of flap servos for older transmitters, like my 2.8 converted Futaba FF9s that cant be programmed to do this at the TX for switched channels. Although my Tarranis TX can be programmed to transition switched channels slowly, for the sake of a fiver & a few grams, I still prefer to use this "hard wired" solution in the model itself.. One potentiometer sets the down transition time for all outputs another sets the up time & the third can reverse one output, to cater for physically mirrored servos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I really love these & regularly add one to my International orders - I now have about a dozen installed in a range of models!...... They provide brilliant, realistic slow transition of flap servos for older transmitters, like my 2.8 converted Futaba FF9s that cant be programmed to do this at the TX for switched channels. Although my Tarranis TX can be programmed to transition switched channels slowly, for the sake of a fiver & a few grams, I still prefer to use this "hard wired" solution in the model itself.. One potentiometer sets the down transition time for all outputs another sets the up time & the third can reverse one output, to cater for physically mirrored servos.

I really love these & regularly add one to my International orders - I now have about a dozen installed in a whole range of models !.... .. They provide really brilliant, realistic slow transition of flap servos when used with older transmitters, like my 2.8 converted Futaba FF9s that cant do this for on/off switched channels. Even though my Tarranis TX can be programmed to transition switched channels slowly, for the sake of a fiver & a few grams, I still much prefer to employ this "hard wired" solution installed in the model itself.. Servo transition time for all outputs is set on one potentiometer & one of the outputs can be reversed to cater for physically mirrored servos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I really love these & regularly add one to my International orders - I now have about a dozen installed in a whole range of models !.... .. They provide really brilliant, realistic slow transition of flap servos when used with older transmitters, like my 2.8 converted Futaba FF9s that cant do this for on/off switched channels. Even though my Tarranis TX can be programmed to transition switched channels slowly, for the sake of a fiver & a few grams, I still much prefer to employ this "hard wired" solution installed in the model itself.. Servo transition time for all outputs is set on one potentiometer & one of the outputs can be reversed to cater for physically mirrored servos.

This is my second servo speed regulator from HobbyKing, no problem both working perfect,switch1 & switch 2 Speed Settings slow fast works ok.CH3 normal and reverse sensitivity great on flaps and landing gear

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my second servo speed regulator from HobbyKing, no problem both working perfect,switch1 & switch 2 Speed Settings slow fast works ok.CH3 normal and reverse sensitivity great on flaps and landing gear

I was suprised how small this regulator is. It's very handy, basically a landing gear/gear door/flaps sequencer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was suprised how small this regulator is. It's very handy, basically a landing gear/gear door/flaps sequencer.

Good product, what a nice design, must have for all RC plane model. It's so small and weight add like nothing...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product, what a nice design, must have for all RC plane model. It's so small and weight add like nothing...

I own this product and I believe many of the previous posts are inaccurate. You cannot reverse a servo with this product. You CAN reverse the direction that the travels either fast or slow. ie: slow extend the landing gear and pull the gear back into the fuselage. 2. slow extend and retract 3. fast extend and a slow return to the fuselage. BUT NO SERVO DIRECTION REVERSE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I own this product and I believe many of the previous posts are inaccurate. You cannot reverse a servo with this product. You CAN reverse the direction that the travels either fast or slow. ie: slow extend the landing gear and pull the gear back into the fuselage. 2. slow extend and retract 3. fast extend and a slow return to the fuselage. BUT NO SERVO DIRECTION REVERSE

Customer files
Manual español Download [72]
No File Name Download [63]
Regulátor rychlosti serv CZECH Download [135]
A point to notice and Japanese manual Download [516]
No File Name Download [1407]
Manual with pictures Download [507]
Slowest and fastest settings Download [22]
WARNING!!!! WRONG CONNECTION MARKS!!!! Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking