Dimension: 31mm x 23mm (including mount)
Weight: 25g (kv1200) (not including connectors)
Diameter of shaft:F3mm
Lamination thickness: .2mm
Battery: 2~3 Cell 3S/11.1VRPM: 1200kvMax current: 6~8ANo load current: 7.4V/0.3ACurrent capacity: 10A/20secInternal resistance: 0.31ohmDimensions: 12x30mm
Pull: 290~500gProp: 7x3.5~9x4.7ESC: 12A
Max Current: 8.5A
Battery Type: 2~3S Only
Suited for Mini indoor planes.
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Very good item. best choice for little epo 3d planes.Bajo peso, ideal para pequeos modelos. Lo usare en mi AcromagnumRunning this motor with a 7 x 3,8 Turigy slow flyer prop, 12A ESC blue series. The ESC stays cool, at full throttle getting handwarm. With a bigger prop you should take a ESC about 20A to be on the safe site. I will try some other props.
Quality good, performance excellent, very little noise but good sound. He pulls about 250g easily vertical up in the blue sky.
Mounting "cross" is to be used in many ways, as its overlapping the motor diameter for about 5mm. You must drill the holes yourself, so that you can choose every distance you need, as well as asymetrical mounting.Motor pesado, nao aguenta helice de 9x5 em 2S nem em 3S, fica frouxo demais. Aparncia bacana, ims fortes, mas o melhor que consegui foi em 3S com Hice 8x45, Esc tem de ser maior que 12A.
Um aero Yak 54 em depron de 2mm de 1m de asa pesando 212g com este motor, hlice de 8x45(4g), esc towerpro 12A e bateria de 370mah 3S, 3 servos de 6g digitais, voa bem por no mximo 8 minutos, porm 6 minutos o recomendado para nao forar a bateria.monto em yak de depron. muito bons e economicosPerfect for small Foamies around 200-250 Gramm with 3s 500mAh and 8x4,3 Gws Solwfly.
Best Motor on my Epptasy!Not happy!
I mounted these on a cuadcopter, one arrived defective out of the box, i ordered two spares and finally got flying, within 5 mins of flight time one of them has broken down again,
the windings are completely horrible and the bearings squeel like crazy after the first few mins, I would not reccomend anyone wastes money on this for a cuad copter
# This is Machine Translation.
I used with the battery of 3S2200mAh, and 8x4.5 propeller.
It had heat to the extent that it does not touch.
In order to use with 3S battery, about 7x5 propeller thinks a limit.
Amazing with 8043 prop Rhino 360mAh 3S 11.1v 20C HobbyKing 10A ESC 1A UBEC Great Planes Yak 54 Indoor 3D EP ARF 32"
AMoteur pas terrible sur l'aspect "pratique" fixation pas ais " si on ne veut pas coller les vis de fixation" et hlice GWS 8/4.3 qu'il faut repercer pour quelle tienne sur la cage sans bouger!