Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Turnigy 3020 Brushless Outrunner Motor 1800kv

Turnigy 3020 Brushless Outrunner Motor 1800kv

Now save save $0.00 $0.00

$19.19
Out of stock!
Rating:
Stock:
OUT OF STOCK
Weight:
49 g
SKU:
T3020-1800

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description
Dimension: 31mm x 23mm (including mount)
Weight: 25g  (kv1800) (not including connectors)
Diameter of shaft: 3mm
Lamination thickness: .2mm

Spec.
Battery: 3 Cell 3S/11.1V
RPM: 1800kv
Max current: 10~12A
No load current: 7.4V/0.6A
Current capacity: 16A/20sec
Internal resistance: 0.145ohm
Dimensions: 12x30mm

 
Pull: 320~450g
Prop: 6x3~9x4.7
ESC: 20A
Max Current: 14A
Battery Type: 2~3S Only
Suited for Mini indoor planes.
Product
Specifications

Additional Information

  • SKU:
    T3020-1800
  • Brand:
    No
  • Weight(g)
    49.00
  • Length
    65.00
  • Width:
    38.00
  • Height:
    38.00
  • Kv(rpm/v)
    1800.00
  • Max Currents (A)
    12.00
  • Power (W):
    0.00
  • Length B (mm):
    16.00
  • Can Length D(mm)
    5.00
  • Max Voltage(V)
    11.00
  • Shaft A(mm):
    3.00
  • Unit Weight (g):
    25
  • Diameter C(mm)
    30.00
  • Total Length E(mm)
    21.00
  • Resistance (mh):
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Using this motor on a HobbyKing reaktor with GWS 6x4 DD prop. Pulling 8.5a at WOT on 2s. It does the job. Only 3 stars because one of the winding wires was broken and had to be soldered before the motor could be used (see same problem on other reviews). Also the prop saver allen screws are so tight that they cannot be removed (believe me I have tried!)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great looking motor, good clean windings, carbon cross mount, good strong magnets and bearings seem smooth. Still have to mount and flight test. My overall rating is only 4 stars due to the fact that a) there is no hardware provided (ie. bullets, shrink, etc.) and b) the cross mount does not come with holes in it for mounting. Other than that, no complaints ;-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor very strong in my scratch built foamie, but burned up H-King 10A esc, anyone else have same problem?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
leistungsstarker motor, 200g zieht er entspannt mit 2s senkrecht in die luft
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motormount is perfekt for shockflyer, its my second motor and the first is still wirking fine!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The most colourful little motor in my collection!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Incredible little motor, i am running this on a Durafly Extra 330sc and it works a treat. plane weighs in at 182g which is a little heavier than recommended weight but who cares with this little motor she prop hangs at less than 1/2 throttle. i am running a 8x4.5 (GWS style) prop on 2s 350mah zippy and a 20amp Turnigy controller. yet to build a thrust tester buti would imagine it would easy pull 400 g. using Watt meter on a static test i was pulling 78 Watts full throttle and 12 amps. Not sure what the Watt rating is for the motor but all seemed to be cool after 30sec.
Thanks Hobbyking for this little awesome number.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good engine fly much power it on 2s with a 9/4.5 prop. After some try this engine worked best with the H-KING 20A Fixed Wing Brushless Speed Controlle.vijf stars











verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good engine fly much power it on 2s with a 9/4.5 prop. After some try this engine worked best with the H-KING 20A Fixed Wing Brushless Speed Controlle.vijf stars
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
a little disapointed carbon fiber mount came warped. other than that the motor runs great running on a profile yak with rhino 750 20c. I am getting good verticals and decent 3D performance on gws 7x3.5
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.