The all new Turnigy 3D-H V2 FBL System is breaking all of the rules by offering top-notch performance at an unbelievably low price. Affordability, ease of use and compatible with any helicopter from 250~800 size, the 3D-H V2 makes going flybarless on your machine a no-brainer!
The 3D-H V2 retains all the great features and ease of setup of the original version, but now adds S.BUS functionality, PPM composite signal and DSM2/DSMX satellite receiver support as well!
The Turnigy 3D-H V2 supports just about any servo type, digital or analog, standard or narrow pulse width. Compatible with 90°/120°/140° swashplates and featuring excellent pirouette optimization functionality, the 3D-H V2 ticks all of the right boxes!
We've flown the 3D-H V2 on our own helis and we are very impressed with its performance and ease of setup. It didn't take long at all to have our Assault 700 in the air with this system. All programming is done via the transmitter sticks and confirmed by LEDs on the control unit. This keeps things simple and eliminates the need for bringing a PC to the field should you need to make adjustments.
There are 3 adjustable potentiometers on the top of the 3D-H V2 that allow quick adjustments for fine tuning. You can adjust the cyclic gain, cyclic response and tail dynamic (stopping power) by simply turning the pots. This furthermore simplifies setup by allowing for quick and easy fine tuning at the field.
• High performance 3-axis FBL system
• Compatible with 250~800 size helicopters
• S.BUS, PPM and DSM2/DSMX satellite receiver support
• Pirouette optimization functionality
• 90°/120°/140° swashplate support
• Aluminium case to reduce vibration
• DSM2/DSMX satellite receiver connection lead included
• Easy to setup
Weight: 22g (without wires)
Operating Voltage: 3.5~8.5V
Sensor Technology: MEMS angular rate sensors
Cyclic Servo Type: Digital or Analog 50Hz/65Hz/120Hz/200Hz
Tail Servo Type: Digital or Analog 960us/760us/1520us
Adjustable Cyclic Servo Frequency: 50Hz/65Hz/120Hz/200Hz
Adjustable Tail Servo Frequency: 50Hz/165Hz/270Hz/333Hz
Included in box:
Turnigy 3D-H V2 3-Axis Flybarless System
OrangeRX/Spektrum/JR (DSM2/DSMX compatible) satellite receiver connection lead
Gyro mounting pads
All necessary wire leads
*Note: Updated user manual available for download located under the "Files" tab below.
great product guys!
ive been using 2 of this units for 6 months now with spektrum satellite
big thumbs up!
very pleased with this unit. I have 2 now and can only assume they are out of stock due to HK wanted to clear out the Tarot ZYX which is nowhere near as good. As per the other posts, throw the instructions in the bin and work with the beastx instructions. I will order more when back in stock as they seem to be in bundles only atmhi guys in manual it seems to want you to set 6deg at mid stick is this correct or a typo maybe should be 0.6deg thanks???Schnelle Lieferung und einfach Klasse das Teil.
Habe es auf einen 450er t-rex und er geht super damitI brought one of these when they first came out (good job because you cant get them now) and it was all down to a video I watched on You Tube with this unit on a Goblin 700 doing thing a cheap FBL unit should not be able to do... now as some background...I was new to FBL as had been flying fly-bar for years...I had tried a Align 3GX and never really liked it...and then saw a really cheap deal on the Robird G31 and found this much better but as usual with anything good in HK out of stock ! .but as this unit was a very good price with great reviews and what looked like an easy setup...I brought and fitted one to a 450 Pro DFC ....wow...locked in from the word go..and so stable on take off which is usually for FBL units..I have now used it for about 3 months ...and even hit the deck hard with it after a very ambitious move with dumb thumbs...and its still fine....all we need now is stock...I really hope it doesnt just go away..Never to be seen again...that would be a real shame..BeastX clone, Not as easy to setup as advertised. Flies well but setup will have to be done by an experienced user. I would have much rather preferred a PC link setup rather than having to program using fliddley blinking lights.Use 3 of it. One in T-Rex500 with one orange sat, one in Gaui X5 FES with orange receiver and sat and ohe in T-Rex600 FBL also with orange receiver and sat.
All fly perfect. The system is easy to setup.
Because of the description: the quick guide is the perfect one - in the book some points are incorrect. The setup points are different to the quick guide...
Have fly a lot other systems (like cx-3x1000, zyx, zyx 2, 3G) - and this is one of the best!
Have fun with it!The satelite does not work, programing is not simple but now it works.got a broken one,will not react to the inputs i give him.
upside : just the same as a beast x configurationBuy 2 in diff oder. One of them faulty at the beginning. The other one faulty after 3 times flight. Lucky not crash my nice TREX 450 PRO DFC. Better got Beast X compare to this cheap clone.
Turnigy 3D-H V2 User Manual download now [4234kb] Turnigy 3D-H V2 Quick Start Guide download now [2001kb] Inst Manuel Errors download now [2kb] No File Name download now [331kb] No File Name download now [1826kb] Inst Manuel Errors download now [2kb] No File Name download now [1826kb] Turnigy 3D-H V2 Quick Start Guide download now [2001kb] Turnigy 3D-H V2 User Manual download now [4234kb] No File Name download now [638kb] stecker download now [638kb]