Reciever for TURNIGY 9X transmitter (V2).
Get that locked-in feeling that only 2.4Ghz glitch free technology can provide.
Ultra fast reaction times and interference-free control of your model is only achievable with this 2.4Ghz technology.
RX-9X8Cv2 receiver is only compatible with TX-9X (v2) transmitter module. This receiver will not suit the AFHDS 9X radio.
Write Your Own Review
Only registered users can write reviews. Please, sign in or sign up
Works great,I installed it in that little clipped wing cub ARF i purchased off of you people.Also the ASPFS 61 was installed,i had to do a little bit of reinforcement on the engine mounting.The motor mounts that came with the kit are really niece,they must have a flex agent in the fiber fill because the flex a bit when the engine is running.Nice job HobbyKing flys like a real cub.You have to apply a little rudder in turn with airleron.
I am new to RC and have had several 'loss of control' crashes where this receiver did not communicate with the transmitter. I have finally worked out the best configuration and since then have had many un-eventful flights. So, I now have my transmitter antenna bent up so it is vertical and to match it I have drilled a hole in the bottom of the foam fuselage and the receiver antenna hangs out the bottom of the fuselage, in more or less a vertical angle. This gets that antenna away from all the electronics in the plane. So no shielding and less chance of interference issues. Also it puts the antenna at right angles to the two steel push-rods - so no reflection signals form the push-rods. And of course there is a good polarization match between the two antennae for 99% or flying time. I was having problems with this when I had the receiver antenna horizontal and was losing signal at various places, and especially when over model was over 150m away.
best receiver for the price
Good receiver does the job.I put my receivers in the back, the one wire antena is very easily place in a plastic tube for support.Sometimes i drill a little hole in the belly of the airplane so little bit of it is showing.Good range.
Nice reciever i am going to order more.Turnigy and Hobbyking have really helped the retired guy on a limited income to get back into model flying.
Very good range and a lot of channels.
This receiver is smart and durable. Crash survivability is quite high. Not sure I want to use any other receiver for now
These are the only ones I use, and I have over 10 of them, work well and great value
I have over 12 of these receivers and never had a problem recommend it as value for money
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!