The Turnigy Accucel 6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The Accucel-6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.
There are several chargers now entering the China market that look similar to the Accucel. These chargers are produced with cheaper FET''s and unfortunately much less accurate and very unsafe. There has been reports of the copied chargers over-charging packs and not balancing correctly.
Our chargers have CE and RoHS certification, proving there safety. Plus, thousands of customers the world over have used our chargers with excellent success.
Your batteries are expensive. We understand this and thats why we will not carry low-quality charging devices.
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST adapter.
*This unit has the same functions (except PC-USB) and features as the iMAX B6, except that it comes with an internal cooling fan.Note: Power supply not included.
a very good charger. very solid. but i have a question due to lack of manual info. i left my tx on and the lipo is almost totally discharged. when i start the charging it says "low voltage" and no cell number info. any ideas on how to fix this? thank you.I'm happy with this unit, had it for 2 months and balancing appears to work just fine for my little 2sp's, the accuracy of mine was ok out of the box, when hooked up to my MM it reads the same charging voltage as the Turnigy (so long as I'm not charging at high amps, then it lags behind, but matches as soon as the charger goes to 0amps to check battery voltage).. for the price I'm not complaining, hope it lasts!Great Charger!! Got mine today and charged/discharged everything from Nimh-Pb-Lipo! Balancer is accurate to .01v when compared with multimeter readings. What you see in the pic is ALL you get, no glow driver/receiver adapter, no TP tap adapter. Gets a little warm, 110-120F at 5/6amps. Fan is quiet (right now) n no issues to report. All in all, a SPECTACULAR little charger n worth EVERY penny. Buying two more!!!!When I got my charger it did not work out of the box. I heard a rattling noise like a rock was inside of it. Opened the case and the resistor coil was loose inside the case. Fired up my soldering iron and re-soldered it to the board then it worked fine. After about a year though, my buttons have started shorting out. This could be an excellent charger if they would just have more pride in its construction.does any one know what Vol select err means when it comes on the screen??I bought two of these chargers and both worked very well. Wish they came with a power supply though...It's really great charger for low money. We're using it as a backup one for our main charger, but it's much simpler in use. Highly recommended item!Great charger highly recomended, every bit as good as a hyperion.... I must say I was not expecting it to last as long but it has! ive had it for 1 year and used it at a minimum 3 charges a week, voltage and amp's still hold within .12v and the balancer is still within .02v , I have not had any issues with button, fan or screen failure. I now do more electric than nitro so I will buy 2 more when stock arrives.I know that this charger has increased my flying time. It takes 45 minutes to charge my Nicads, and Nmhi batteries at the field instead of 14 hours. I feel safer as I can check the voltage and even cycle the batteries. I was going to throw away several batteries but they work fine after cycling them. I just know it works and I am trusting them as I have 3 to 500 dollars flying around. Have not crashed due to battery failure. ThanksI really like this charger. It is small and light yet well built. Comes with most every type of connection needed to charge your batteries from deans to a glow starter.
Be sure to order a power supply with this charger if you intend to use 110V. Otherwise the provided plug with alligator clips works perfectly.
Charged/balanced my 4000mah lipo in around 30 min. Fast charged a 3300 nimh battery @ 5A in about 20 min. Input V only varied by 250mV.