Country
United States
 
Shipped From:

Turnigy Accucel-6 50W 6A Balancer/Charger w/ Accessories

Turnigy Accucel-6 50W 6A Balance...

The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge LiPoly and NiMH batteries.
The Accucel-6 will handle LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage du...
ACC6

Now save save $0.00 $0

$24.10
OUT OF STOCK
437g
ACC6

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge LiPoly and NiMH batteries.
The Accucel-6 will handle LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either at the field by using a 12v input such as a car battery or at home with a 12v power supply.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.

ATTENTION.
There are several chargers now entering the China market that look similar to the Accucel. These chargers are produced with cheaper FET's and are unfortunately much less accurate and very unsafe. There has been reports of the copied chargers over-charging packs and not balancing correctly.
The Accucel-6 is the first charger in the market with this PCB layout Circuit design. Any charger with the same circuit diagram is most definitely a copy. We have tested the copied chargers ourselves, their componentry is of a very low quality and the manufacturing company that has produced the copy has used a process of duplicating our CPU(MCU)'s hex file and flashed a similar chip(MCU) to produce a similar product. This means they do not have the original code and therefore cannot bug-test(QC) or update the charger at any point.
Our chargers have CE and RoHS certification, proving their safety.
Plus, thousands of customers the world over have used our chargers with excellent results.
Your batteries are expensive. We understand this and thats why we will not carry low-quality charging devices.
Trust only in TURNIGY® quality charging devices.

Features:
• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing
• Li-ion, LiPo and LiFe capable
• Ni-Cd and NiMH capable
• Large range of charge currents
• Store function, allows safe storage current
• Time limit function
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 5 packs in memory)
• Battery break in and cycling.

Specs:
Input Voltage: 11~17v
Circuit Power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
NiMH/NiCd Cells: 1~15
LiIon/LiPoly Cells: 1~6
Pb battery Voltage: 2~20v
Weight: 355g

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.

Note: Power supply not included.

Specs

Additional Information

  • Blade Count:
    N/A
  • Diameter X(Inch):
    No
  • SKU
    ACC6
  • Weight(g)
    437.00
  • Length:
    165.00
  • Width:
    40.00
  • Height
    150.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

????????????? ???????. ????????, ???????? ? ????????? ? ?????? ??????????? ? ????? ???? ????????????. ???????????? ????? ? ??????? ? ???????? ??????? ???????? ??? ?????????? 0.01 ??????. ?? ???????. ?? ????? ???? ??????????? ?? ??????? ?????.
Great little charger. I use it to charge my LiFe receiver packs. I charge after every third flight, so it gets used alot. Never had a problem, and packs are staying in good balance. I will also occasionally use it to charge my 3S 1500mah LiPo's. It's small size makes it nice and easy to throw in my toolbox and always have it with me. Great buy for the money.
The charger worked perfectly for over a year and I was very satisfied by its performance. But couple of days ago it started showing error message "BATTERY VOL ERR CELL CONNECT" and showing that I have 0, 1 and 5.12 volts on 3 different cells of my 3s batteries. I checked the battery with digital multimeter, but it was perfectly fine. I tried another batteries but it was all the same. So now the charger can only charge without balancing which is unacceptable
Excellent charger for the money. Mine has been rock solid reliable for over 2 years now, and is used almost daily.
I have three of these chargers and consider them to be the best available. They are a quality product, durable and very reasonably priced. I bought my first one three years ago and still use it almost daily. I can run all three off of my large DC power supply and use parallel charging cables to charge two three cell batteries on each charger.
I've had this for more than two years and it's been a great little charger. I mainly fly micro heli's and planes and park flyers. Recently I've noticed that my batteries are only being partially charged. I've tried to calibrate the charger but it only allows me to adjust it so much. It seems it's way out of spec. Anyway, it's been fine up to now and now it's time to look for another charger.
Great charger as a starter.

Easy to use and comes with the necessary XT60 plug for my 3S batteries. Would advise this to a beginner looking for a decent charger to start with.
I have 2 of these. Great charger. Make sure and buy the 105W/7A power supply. Well worth the money. So easy to use. Thanks Hobbyking!!
Charger came in and was better than expected! This thing is relatively small in size compared to others on the market, and has TONS of options! Only reason when this merits a 4 star rating is because it does not come with the power supply. But, just pick up any old laptop power supply hat puts out 12v and is 50w or greater, and you are good to go!
Great charger for the money. This is my second one, bought so I can charge more Lipos at the same time. The first is still going strong after 5 years of use. Balances well with pretty good accuracy and you can also calibrate it if you feel yours is a little out. Can't be beaten for the price.
View all reviews
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [1424kb]
Turnigy Accucel-6 Fan Noise Fix.txt download now [1kb]
ProgChartLiPoToLiFe download now [104kb]
Changing Li type download now [104kb]
Turnigy Accucel-6 Fan Noise Fix.txt download now [1kb]
ProgChartLiPoToLiFe download now [104kb]
ACCUCEL 6 manual download now [2346kb]
ACCUCEL-6_manual download now [2346kb]
Navod download now [775kb]
Accucel-6 Manual Deutsch download now [1352kb]
Türkçe Kullanma Kılavuzu download now [406kb]
ACCUCELL Portugues download now [1027kb]
Charger circuit (AlexN) download now [163kb]
No File Name download now [163kb]
No File Name download now [163kb]
Accucel-6 Manual download now [2346kb]
manual español por espino download now [667kb]
No File Name download now [436kb]
No File Name download now [1352kb]
793881027X164982X56.pdf download now [515kb]
No File Name download now [2346kb]
ACCUCEL-6 manual.pdf download now [2346kb]
Accucel Manual download now [2346kb]
Turnigy Accucel-6 50W MANUAL_greece download now [83kb]
TURNIGY-ACCUCELL-6 RUS A5 10.2014 PDF download now [3338kb]
TURNIGY-ACCUCELL-6 RUS A4 10.2014 PDF download now [4599kb]
How to Calibrate download now [0kb]
the lm35dz wiring that worked for me download now [19kb]
Pb сharge download now [1847kb]
Accucel 6 240V download now [1894kb]
Accucel 6 240V (2) download now [2235kb]
Turnigy Accucell 6 Manual download now [2346kb]
whatchrisgot download now [429kb]
accucel 6 manual download now [2346kb]
Accucel 6 manual download now [2346kb]
No File Name download now [0kb]
LiPo - LiFePo4 - Li-Ion setup download now [8kb]
LiPo - LiFePo4 - Li-Ion setup (SPANISH) download now [9kb]
LiPo - LiFePo4 - Li-Ion setup download now [8kb]
LiPo-LiFe-LiIo-setup(Spanish) download now [9kb]
How to LiPo-LiFe-LiIo setup download now [8kb]
Adapter-HK1500-to-ACCU6-1 download now [169kb]
Adapter-HK1500-to-ACCU6-4 download now [160kb]
Accucel charger download now [2346kb]
Case mod after DIY LCD Repair download now [1467kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.