The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge LiPoly, LiFe, LiHV, NiMH, Nicd and Lead Acid batteries.
If you are looking for a charger for your Bolt batteries this unit is perfect as a low cost, go anywhere solution. The Accucel-6 will handle LiHV/LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately. And because this is a 12v DC charger you can power it up at the field using a 12v car battery or at home with a 12v power supply.
It is also able to connect this charger to your PC using a USB cable (not supplied) so you can monitor pack voltage, cell voltage and other data through real-time graphs during charging. You can also control charging and update firmware from "Charge Master".
Also included with the Accucel-6 are input and output wires with XT60 plugs.
There are several chargers now entering the China market that look similar to the Accucel. These chargers are produced with cheaper FET's and are unfortunately much less accurate and very unsafe. There has been reports of the copied chargers over-charging packs and not balancing correctly.
The Accucel-6 is the first charger in the market with this PCB layout Circuit design. Any charger with the same circuit diagram is most definitely a copy. We have tested the copied chargers ourselves, their componentry is of a very low quality and the manufacturing company that has produced the copy has used a process of duplicating our CPU(MCU)'s hex file and flashed a similar chip(MCU) to produce a similar product. This means they do not have the original code and therefore cannot bug-test(QC) or update the charger at any point. Our chargers have CE and RoHS certification, proving their safety.
Plus, thousands of customers the world over have used our chargers with excellent results.
Your batteries are expensive. We understand this and thats why we will not carry low-quality charging devices.
Trust only in TURNIGY® quality charging devices.
• Microprocessor controlled
• Individual cell balancing
• LiHV, Li-ion, LiPoly and LiFe capable
• Ni-Cd and NiMH capable
• Delta-peak sensitivity (NiMH/NiCd)
• Lead Acid capable
• Large range of charge currents
• Terminal Voltage Control (TVC)
• Lipo Battery Meter
• Battery Internal Resistance Meter
• Store function, allows safe storage current
• Time limit function
• Temerature Cut-off (20-80 degree Celcius/68-176 Fahrenheit)
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 10 packs in memory)
• Battery break in and cycling. (1-5 cycles)
Input Voltage: 11~18v
Circuit Power: Max Charge: 80W / Max Discharge: 10W
Charge Current Range: .1~10.0A
Balance Cells: 2-6 cells
NiMH/NiCd Cells: 1~15
LiHVLiIon/LiPoly Cells: 1~6
Pb battery Voltage: 2~20v
This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.
1. Accucell 6 80W Charger
2. XT60 with Banana connector Charging Cable (430mm)
3. XT60 with Banana connector Charging Cable (300mm)
4. XT60 with Alligator Clip Charging Cable
Note: Power supply, power source cable, thermo sensor and USB cable are not included.
I purchased this charger as I wasn't happy with the imax B6 (clone) working one minute then going haywire the next. So I got this, so glad I did its being excellent for all my charging needs the only downside you need to buy a dedicated power supply with the xt60 connector on it or like me make an adapter that can fit a 10A laptop power supply. Brilliant and fast delivery from HK.Overall very good. 1.13 soft undeveloped. Well that patches, and new soft (firmware). It has everything you need. Connection to a PC, very useful. I'm very happy.The best charter for this price. Is possible to charge many type of batteries. Required a 12v-15v dc Power supply.Great charger, compact and versatile, using at home and in the car. For home use, need a 12V power supply, easy to find or diy from a desktop power supply. The price is very resonable. I'm using it for LIPO and LIFE battery.
Shipping ultra fast, 5 woring days to Romania!
Thanks Hobbyking!I have used this charger for a little over a month now. It's very reasonable priced charger with a ton of features. The only thing I wish for is if it can be calibrated. I found mine to overcharge a little(double checked with professional grade multimeter, as well as another more expensive lipo charger). An easy workaround is to set the TVC to 4.18V (it only allows you to change it from 4.18V to 4.25V). Now it finish the charge at 4.20V as supposed to. Wish I can finish the charge a little lower though.Ik heb deze lader sinds kort in gebruik en hij voldoet perfect.
Mooi product met veel mogelijkheden.
Erg handig vind ik de XT60 aansluitingen van deze lader.
Gekocht om de interne weerstand van de accu's te kunnen meten.
Verder werkt de PC interface ook goed.
Kortom een echte aanraderThe charger can use batteries to graphene?Overall great product. I'm just writing this review because it has one major flaw : the DC input plug is an XT60 ! This is terrible as I'm not going to modify my power source with an XT60 output plug so I had to create an adapter...
The Accucell 6 50 W has a normal DC input, why did they put an XT60 on this one ? GrrrFan motor RATTLES UNTIL U TAP IT COUPLE TIME on mine, Charges Bolt battery nice evenly and fastExcelent charger ! with a lot of cool features
Official Manual Accucel 80w download now [7284kb] Users Manual download now [7284kb] PC software download now [1995kb] PC software download now [1995kb] ACC6 80W firmware v1.13 download now [85kb] PC software download now [1995kb] PC software download now [1995kb] PC software download now [1995kb] PC software download now [1995kb] Turningy accucel6 blank display how to solve download now [5.08Mb] B6mini_Upgrade_V1.14_Add_Calibration.rar download now [85.94Kb] Calibration download now [186.00B]