Turnigy Adjustable 12 in 1 Multi Tool - Hex/Flat/Phillips

A great tool! I was surprised at the quality of the tool. All of the individual drivers fit into the handle very well and a rotary top allows you to choose which tip you want or covers the openings up to lock them in. The spring load holding the drivers in works very well. Highly recommended!

It has a heavy quality feel to it.
The other bits are held in place by a door that rotates with a distinct snap to it for each place.
The bit has a friction lock, so you can pull it out making it longer or shorter to suit your need. To loosen the lock you press the button thing shown in the pictures.

Great multi tool to have but I don't like how bits are stored because when I screw something bit lock turns and bits starts to come loose.

This is by far the best version of this type of multi-tool to date (imho). This is the first multi-tool I've found that has all the common sizes that I use regularly. All previous versions I have found were missing an often needed size or two, nearly always the .05" size that I need all the time! And yes, the smallest Imperial size is in fact .05", not .5" as advertised. When used for typical light duty hobby work, the tool is plenty strong in my opinion. As others have noted, the bit lock is ornery sometimes, and the bit door on the end can turn, but for the price I'm not complaining!

There's a few critical issues with this tool

1) When you are using it, as you twist, it will often slide the circular "door" which keeps the other bits in place inside the handle. They will slide out if you are screwing at an angle or if you put the tool down.

2) That same door is not very comfortable on the palm of your hand - if you use this tool a lot, it's not comfortable.

For emergency field repairs, it's great. But for any semi-regular use... get a real set of drivers.

I bought this tool to build my Trex 500L kit and i was very happy with it. The tips are not as strong as they could be but if you tighten only as hard as you need to they are fine. The spinning part on the handle to hold the bits can sometimes spin while using so the bits can come out unexpectedly. Neither are a big issue again if you use it as it should be used. I'm happy with it and its nice not having to have a bunch of small allen keys taking up more room with storage than this.

Extremely high quality, I was really surprised; so much better than my previous one and not really that much more expensive.

These screw driver and hex nut driver are excellent quality

HM HM HM - would like other bits for the EU Market - not needed imperial size hex - would prefer perhaps bigger a.e. PH1 or a second 1,5 mm hex (knowing it will be needed after time....).

Lever for losen bit, is annoying sometimes.

wow good!! Turnigy Adjustable 12 in 1 Multi Tool - Hex/Flat/Phillips