Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 3536-1050kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 3536-1050kv Brushless Outrunner Motor

QTY:

Now save save $0.00 $0.00

$33.78
Rating:
Stock:
Weight:
196 g
SKU:
9192000250-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
acc
Product
Description

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival, but surpass the quality of the leading motors on the market today using the best quality magnets, bearings and materials available.

The result is an outstanding series of motors that are efficient, strong and robust enough for the most discerning modeller.

All of the SK3 series use quality double shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available) and a string wound stator to ensure an accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modellers who are seeking a top quality brushless motor without compromise.

Features:
• Double shielded bearings
• Sintered neodymium magnets
• String wound stator
• High quality finish
• Super-smooth operation

Specs:
Voltage: 11.1~16.8V (3~4S LiPoly)
RPM/V: 1050kv
Max Power: 443W
Max current: 40A
Idle current: 0.021A
Resistance: 39mh
Shaft: 5mm
Bolt holes spacing: 25 x 25mm
Bolt thread: M2.5
Plug: 3.5mm Bullet
Suggested ESC: 50A
Motor dimensions: 37 x 30mm
Weight: 105g

Included:
Motor
Mount & screws
Prop adapter

Product
Specifications

Additional Information

  • SKU:
    9192000250-0
  • Brand:
    Turnigy
  • Weight(g)
    196.00
  • Length
    110.00
  • Width:
    45.00
  • Height:
    80.00
  • Kv(rpm/v)
    No
  • Max Currents (A)
    No
  • Power (W):
    No
  • Length B (mm):
    No
  • Can Length D(mm)
    No
  • Max Voltage(V)
    No
  • Shaft A(mm):
    No
  • Unit Weight (g):
    105
  • Diameter C(mm)
    No
  • Total Length E(mm)
    No
  • Resistance (mh):
    No
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome motor. Nice quality and ver smooth. I have it in a Skywalker revolution on 3s and a 12" prop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just mounted my 3536 1050kv in my Eflite Slick.. first I noticed the mounting bracket hole pattern was off (had a matching bracket in my extra parts box).. I mounted a 12x6 elec.. APC prop and it runs about 40amps.. seems strong on 3s.. Over all I like it..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be careful - the motor has reverse shaft mounting. To reverse the shaft you need to loosen two grab screws which is very difficult to do without damaging them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A decent motor, like all SK3 series. Tested with on 3S battery using 10x6 folding prop - draws 28A at full throttle, reaching around 10k rpm.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.