- Product
Description -
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.
Specs.
Turns: 14T
Voltage: 3~4S Lipoly
RPM/V: 1200kv
Internal resistance: 0.028 Ohm
Max Loading: 38A
Max Power: 560W
Shaft Dia: 5.0mm
Bolt holes: 25mm
Bolt thread: M3
Weight: 111g
Motor Plug: 3.5mm Bullet Connector - Product
Specifications -
Additional Information
-
SKU:
SK3-3536-1200
-
Brand:
Turnigy
-
Weight(g)
213.00
-
Length
111.00
-
Width:
45.00
-
Height:
82.00
-
Kv(rpm/v)
1200.00
-
Max Currents (A)
38.00
-
Power (W):
560.00
-
Length B (mm):
37.00
-
Can Length D(mm)
16.00
-
Max Voltage(V)
15.00
-
Shaft A(mm):
5.00
-
Unit Weight (g):
111
-
Diameter C(mm)
37.00
-
Total Length E(mm)
58.00
-
Resistance (mh):
28.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
https://www.youtube.com/watch?v=G6duCZa3e9c
I love the motor, plenty of power with a 3s. Using a 11x5.5 prop, vertical no probGreat product. Put it on my Addiction, Hoar 11x5 or 11x5.5 APC, 3s ZippFly 1600, 1.5 kg of thrust, 36A. Denied servos, hit the pavement, the plane crashed, the monitor hardly affected. It fell off the retaining ring, all fixed shaft put in place good working on.nice power and well made. Amp draw is within the spec.Just received this motor....I have installed in a funcub, with 11x5.5 prop...loads of power ...goes vertical no problem and super smooth compared to the motor i was using before. highly recormended.Great motor for MPX Funcub and similar planes.Very good item, but too small connectorsum bom motor, vou testalo no meu skywalkerBon moteur !
Il emmne mon planeur de 1650g quasi la verticale avec une 10x6 et un accu Zippy 3S de 2200mAh. Conso au max : 40A. P: 450W.
Temprature aprs 30s fond : 60.
Mon exemplaire pse en fait 107g.
Didierthis particular Turnigy motor actually has a larger stator and is a slightly heavier motor.
The larger stator should actually make the SK3 motor capable of generating more power and thrust.I run this on my Durafly T-28 with a 4S 2200 60 Amp ESC and 7x10-3 prop and Im doing about 100 mph. Great motor. - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesNo File Name download now [144kb] No File Name download now [124kb] SK3-3536(DT3013-14P) MOTOR (1) (edited).pdf download now [121.08Kb]
- acc
Combine
essential items and
