- Product
Description -
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.
Specs.
Turns: 10T
Voltage: 3~4S Lipoly
RPM/V: 1185kv
Internal resistance: 0.024Ohm
Max Loading: 49A
Max Power: 730W
Shaft Dia: 5.0mm
Bolt holes: 25mm
Bolt thread: M3
Weight: 141g
Motor Plug: 3.5mm Bullet Connector - Product
Specifications -
Additional Information
-
SKU:
SK3-3542-1185
-
Brand:
Turnigy
-
Weight(g)
248.00
-
Length
110.00
-
Width:
45.00
-
Height:
80.00
-
Kv(rpm/v)
1185.00
-
Max Currents (A)
49.00
-
Power (W):
730.00
-
Length B (mm):
43.00
-
Can Length D(mm)
22.00
-
Max Voltage(V)
15.00
-
Shaft A(mm):
5.00
-
Unit Weight (g):
141
-
Diameter C(mm)
37.00
-
Total Length E(mm)
64.00
-
Resistance (mh):
24.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
I like this motor.... I rock one in my Fun Cub, on 4s with a 12x6 prop and a 60amp plush ESC.... Mind you I don't run full throt for more then 6 sec but boy talk about power, Its in the clouds in a blink of an eye... good bearings as well..this motor is high and powerful for for highly performance 3d plane...also good for warbirds....arrived with 4 days from DHL shipping...thank you hobbykingBest motor for 3d and fast plansThe first one burnt out in the sky while at full throttle. I ordered the second one but it came to me without the accecories. On the other hand it has been a very powerful motor while it was working. I offer you to prefer the SK series.I have two... wait 1 of these motors. I lost one when my plane self destructed because of the insane power! I am running this on a 63" flying wing weighing in at about 5.5lbs and can easily vertical with a 9x6 prop on 4S. It draws right around 45-50A WOT.10x6e - 4s 3000 30c - 820w - 57a
10x5e - 4s 3000 30c - 740w - 50a
9x6e - 4s 3000 30c - 640w - 44a
Super moteur, a peine tide aprs 60sec a pleine puissance (820w).
Je pense utiliser la 9x6e pour voler, afin d'conomiser l'autonomie.Sorry! I bought this engine but the results are bad!? With battery 3s I measured only 129 watts?! The same power is with the propeller 10 x 6 and with 11 x 5.5. Does anyone know why such a small force?I bought this engine but the results are bad!? With battery 3s I measured only 129 watts?! The same power is with the propeller 10 x 6 and with 11 x 5.5. Da li netko zna zbog cega je ovako mala snaga?Nice motor for a 25e plane on 3s.This is a good motor for use with a small prop and a 4S battery - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesSK3-3542(DT3019-14P) MOTOR (edited).pdf download now [131.30Kb]
- acc
Combine
essential items and
