Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Aerodrive SK3 - 6354-215kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 6354-215kv Brushless Outrunner Motor

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-6354-215
want FREE shipping? Click here to find out more!

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufacturers on the market today.

The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.

Specs.
Turns: 22T
Voltage: 10S Lipoly
RPM/V: 215kv
Internal resistance: 0.032 Ohm
Max Loading: 65A
Max Power: 2100W
Shaft Dia: 8.0mm
Bolt holes: 32mm
Bolt thread: M4
Weight: 485g
Motor Plug: 4mm Bullet Connector

  • Kv(rpm/v) 215.00
  • Max Current (Motor) (A) 65.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 37.00
  • Power (W) 2100.00
  • Shaft A(mm) 8.00
  • Length B (mm) 58.00
  • Can Diameter C(mm) 63.00
  • Can Length D(mm) 54.00
  • Total Length E(mm) 83.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

visioneer_one | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 05, 2014

All of the listed specs are incorrect. I just measured mine - the bare motor is 52.7mm long and 490g, motor bolt-on adapter and X-mount is 65.7mm long and 554g. More to come after I run it.

RS1234 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 13, 2014

Well, mine has just done the same as Luckiestpants, same setup, in their 1.9m MX2, only had six flights!!!! So much for getting better. Should of got a Hacker, will do now.

Luckiestpants | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 12, 2014

Threw it magnets and seized on the 4th ever flight. Used in a Sebart Katana 120 on 10s Zippy Lipo's and 20x10 prop. All within manufacturers recommendations. I thought the motors were getting better from Hobbyking, in my experience it's never worth chasing a warranty claim. Chalk it up yo experience.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories