Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy AerodriveXp 28-36 SK Series Shaft

Generating Links

Turnigy AerodriveXp 28-36 SK Series Shaft

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
SK2836Shaft
want FREE shipping? Click here to find out more!
Turnigy AerodriveXp 28-36 SK Series Shaft
 
Shaft diameter : 4mm
 
 
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Gavin | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 12, 2011

Are there any specific shafts for this motor PRODUCT ID: T2836-1000 or will these shafts fit all?


Charlesd | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 16, 2011

This is what I am talking about HK.. A great priced, well balanced EDF motor shaft that can handle 4-cell batteries load with authority. I needed to put this motor in the 70mm EDF unit that HK provides. I also had to modify the motor shaft to a 4mm motor shaft. This was a easy fix. Casuse used this (Turnigy AerodriveXp 28-36 SK Series Shaft) Thanks to the those that recommended this to me, which fit perfectly. Great balance too. Now this motor perrrs with power. 5 Stars on this one for sure!

alesu | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 14, 2011

The length of the shaft is 51 mm and the groove position is 11,5 mm from the end. The washer lock is included.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 24, 2010

I order 1 to replace with my Turnigy 2836-2450. This 1 is 3mm shorter than the original. But still can use.

Not as the Photo | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 08, 2010

This shaft is not as the photo. There is only 1 groove, the
picture shows 2 grooves. I needed a shaft to mount the
prop in the opposite/other direction from the motor,
so I needed that last groove on the shaft.I bought 3 they
are no good to me.

Michaelt | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 07, 2010

This shaft worked perfect on this motor-which is want I wanted-

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8138

Jan | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 08, 2010

Wanted to use these on my Turnigy2836 brushless Outrunner 2350kv



The shaft is much shorter, the main reason I give this only 2 stars is that there is only 1 groove, the picture shows 2 grooves. I needed a shaft to mount the prop in the oposit/other direction from the motor, so I needed that last groove on the shaft. O

tonioaltea | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 24, 2010

asse come gi detto di ottima finitura

Customer | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 21, 2010

ended up ordering this for my 2836 3200kv Turnigy edf motor.

Shaft is a about 4mm longer than the original and will require either a couple of washers at the front of the motor under the circlip /or grinding a longer flat spot on the rear of the shaft so the grub screw has a flat bit to grab on the grub.

If you grind the shaft flat spot you wont need spacers on the front end.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!