Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy AquaStar 3520-1700KV Water Cooled Brushless Outrunner Motor

Generating Links

Turnigy AquaStar 3520-1700KV Water Cooled Brushless Outrunner Motor

Price:

Now save save $0.00 $0.00

$25.89
Status:
Out of stock!
SKU:
9357000003-0
want FREE shipping? Click here to find out more!

The Turnigy AquaStar 3520-1700KV brushless motor offers outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you won't find a better priced motor of this caliber anywhere else!  It features an aluminum water cooling jacket pre-installed and has an air circulation cooling fan pre-fitted for extra cooling in your boat.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined aluminum motor can 
• High purity copper windings
• 3.5mm Bullet connectors pre-installed
• Includes 3.5mm bullet connectors for your ESC  
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket and cooling fan pre-installed


Specs:
RPM/V: 1700KV
Max Voltage: 14.8v (4S)
Max Current: 50A
Max Watts: 750w
Resistance: 0.021ohm
No Load Current: 1.2A
Diameter: 35.4mm (Actual Motor Diameter)
Length: 62mm
Shaft Size: 5mm
Shaft Length: 14.5mm
Weight: 188g

  • Kv(rpm/v) 1700.00
  • Max Current (Motor) (A) 50.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 15.00
  • Power (W) 750.00
  • Shaft A(mm) 5.00
  • Length B (mm) 62.00
  • Can Diameter C(mm) 35.00
  • Can Length D(mm) 37.00
  • Total Length E(mm) 77.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Phil | Verified Buyer

  • Quality
  • Overall
  • Value

Excellent motor!

Jul 07, 2020

Runs the K&B 28mm water jet brilliantly on a 3 cell.
Yup, mine leaked water as well. Not much but also an easy fix by mixing a small amount of epoxy glue and filling the void where the wires enter the body. No more worries.

Scott | Verified Buyer

  • Quality
  • Overall
  • Value

Great for the price!

Jun 24, 2020

Read other reviews stating it leaks water. Haven’t noticed that on mine but in a jet boat that eventually gets water in it anyway. I just glued up the spot where the wires enter as others have mentioned and it hasn’t caused any issues

Rowen | Verified Buyer

  • Overall
  • Value
  • Quality

LEAKS

Mar 17, 2020

Bought two, both leaked.
There are copious reports on this problem and the suggested solution. Seems the water comes out through the wire aperture and not from the shaft seal. Which was also my experience.
Reported in to HK, but could see little point in sending back as probem is endemic to this motor. Out of stock anyway.
Decided to squeeze silicon sealant all around the wires to seal the aperture, fortunately had good access..
After a short amount of running, leak seems to be cured. Going to continue with model into further test runs but think problem is solved.

Phil | Verified Buyer

  • Overall
  • Value
  • Quality

Great little motor.

Sep 15, 2019

I bought 3 and they all leaked but it's really easy to fix which I did to all three motors. They leak where the wires come out of the cooling ring. There is a space around the wires where they enter. Simply mix a bit if epoxy glue and pour it into the area around the base of the wires. Don't over fill. It only takes a small amount and it doesn't seem to enter the workings of the motor. Only put glue on the cooling ring area otherwise your going to glue the two parts of the motor together. You can test by blowing through the cooling tube and blocking the other end. If it leaks you'll hear it. Cheers and happy boating.

rinse | Verified Buyer

  • Overall
  • Value
  • Quality

Turnigy AquaStar 3520-1700KV

Dec 29, 2017

good powerfull motor , after ordering i got a leaking one , hk replaced it and now its ok , good power with 4s in a jet boat

Peter | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Apr 27, 2015

nice Motor, good looking, powerful, but - I should have read the reviews before - it's leaking like hell. Gotta find another one and ask for refund for this. Can only recommend not to buy this one :(

Michio | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 31, 2015

Mine is leaking too, most of the water exits the motor via the axle. Will try to fix, after de-installing the fan you can unscrew the axle and open the motor. A bit dissapointed but should have read the reviews before buying.

Eddy | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 26, 2015

I purchased two, sending two back, leaks around shaft, should have headed other reviews.
Very tedious sending back and then I have to reconfigure the boat.

player1212 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 13, 2015

Two of purchased engines were leaking, moreover the replacement were leaking too. Now I have four leaking motor... So I don't recommend buying this part.

dexter70 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Oct 28, 2014

I have bought this motor but its in the trashcan now.
The watercooling was leak and was running water right in the motor.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!