New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy AquaStar 3660-2050KV Water Cooled Brushless Motor

Turnigy AquaStar 3660-2050KV Water Cooled Brushless Motor

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$40.91
Status:
In Stock
SKU:
9392000019
WANT FREE SHIPPING? Click here to find out more!

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 2050kv
Poles: 4
Max voltage: 18.5v (5S)
Max Current: 100A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm

  • SKU 9392000019
  • Brand AquaStar
  • Shipping Weight 437.0000
  • Length 110.00
  • Width 65.00
  • Height 70.00
  • Kv(rpm/v) 2050.00
  • Max Current (A) 100.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 19.00
  • Power (W) 1800.00
  • Shaft A(mm) 5.00
  • Length B (mm) 60.00
  • Diameter C(mm) 44.00
  • Can Length D(mm) 60.00
  • Total Length E(mm) 75.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use it with 4S, 120A Flycolor ESC, 438 prop and works greate. after 18 min of run with 2x4S is just luke warm.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

I use it with 4S, 120A Flycolor ESC, 438 prop and works greate. after 18 min of run with 2x4S is just luke warm.

bon produit ,arrivee rapide

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bon produit ,arrivee rapide

Terrible product. The motor started to smoke (after about 2 seconds) and then seized up during my initial bench test on 4s. Now it is useless, DO NOT PURCHASE!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Terrible product. The motor started to smoke (after about 2 seconds) and then seized up during my initial bench test on 4s. Now it is useless, DO NOT PURCHASE!!!!

6 minutes run and the motor fired fireing also the esc. aquasrtar 120 A esc 4200 4 S battery x 438 prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

6 minutes run and the motor fired fireing also the esc. aquasrtar 120 A esc 4200 4 S battery x 438 prop

Ich hatte einen von diesen Motoren in meiner Princess. Nach der zweiten fahrt wollte ich ihn ein drittes mal ausprobieren. Doch er funkte. Regler war immer ein Turnigy 120a. Ich probierte ihn noch auf einem Hobbyking 120a Regler. Doch er funkte wieder.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich hatte einen von diesen Motoren in meiner Princess. Nach der zweiten fahrt wollte ich ihn ein drittes mal ausprobieren. Doch er funkte. Regler war immer ein Turnigy 120a. Ich probierte ihn noch auf einem Hobbyking 120a Regler. Doch er funkte wieder.

Just like the other review, I had two magnets disintegrate on the ends after a dozen or so runs on 4s setup using S&B 40 and 42 mm Hobbyking(TFL) props. Those two magnets show evidence of cracking around the centally located screw holes as well. Shame it was a nice running motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just like the other review, I had two magnets disintegrate on the ends after a dozen or so runs on 4s setup using S&B 40 and 42 mm Hobbyking(TFL) props. Those two magnets show evidence of cracking around the centally located screw holes as well. Shame it was a nice running motor.

Nice Looking Motor, Performed Well For 2 Runs on 4S in 80cm Mono,Next Run Still Running Cool & Seized up. On Inspection the Armature Magnuts had all Cracked, This Motor uses Screws to Retain Magnuts, Very Poor Design. To HKs Credit they Gave Me a Credit. Not Recomened

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice Looking Motor, Performed Well For 2 Runs on 4S in 80cm Mono,Next Run Still Running Cool & Seized up. On Inspection the Armature Magnuts had all Cracked, This Motor uses Screws to Retain Magnuts, Very Poor Design. To HKs Credit they Gave Me a Credit. Not Recomened

My setup with this motor:
26" Hydro raceboat
turnigy marine 180 esc
40mm aluminum prop
4s 20c 3000mah battery
battery/esc/motor runs cool
8min runtime at full throttle
Speed 70 km/h

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My setup with this motor:
26" Hydro raceboat
turnigy marine 180 esc
40mm aluminum prop
4s 20c 3000mah battery
battery/esc/motor runs cool
8min runtime at full throttle
Speed 70 km/h

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save