New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy B36-40-05 3900kv Inrunner

Turnigy B36-40-05 3900kv Inrunner

Discontinued Product

Please continue searching for a similar product.
SKU:
B36-40-05-3900
WANT FREE SHIPPING? Click here to find out more!

TURNIGY brushless Inrunner

Spec.
Kv: 3900rpm/v
Power: 390W
Turns: 5
Resistance: 13
Idle Current: 4.3
Esc: 45
Battery Config: 3-4S
Length: 42mm
Width: 36mm
Shaft: 5mm
Weight: 170g

 

 

  • SKU B36-40-05-3900
  • Brand -
  • Shipping Weight 199.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 3900.00
  • Max Current (A) 0.00
  • Resistance (mh) 13.00
  • Max Voltage(V) 15.00
  • Power (W) 390.00
  • Shaft A(mm) 5.00
  • Length B (mm) 42.00
  • Diameter C(mm) 36.00
  • Can Length D(mm) 40.00
  • Total Length E(mm) 54.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good moter running with hobbyking ss series 40-50A esc and a 3s 1500mAh lipo but only gets a little warm.

so five star

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good moter running with hobbyking ss series 40-50A esc and a 3s 1500mAh lipo but only gets a little warm.

so five star

Installed to a Tamiya TL01, you have to redrill pignon from diameter 3mm to 5mm and the car run very fast

Mostly recommanded *****

Best quality value for the price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed to a Tamiya TL01, you have to redrill pignon from diameter 3mm to 5mm and the car run very fast

Mostly recommanded *****

Best quality value for the price

I have this in my Evader ext once i got over the 5mm shaft issue(48p pinions hard to find) turned it into a rocket. running 88t spur and 26t pinion it flys(70-85km/h) on 2s,debating 3s. motor and speed control barely warm (30-45C) after 20min run. All in all a good buy looking to get more of these TURNIGY motors for all my boats and other cars.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this in my Evader ext once i got over the 5mm shaft issue(48p pinions hard to find) turned it into a rocket. running 88t spur and 26t pinion it flys(70-85km/h) on 2s,debating 3s. motor and speed control barely warm (30-45C) after 20min run. All in all a good buy looking to get more of these TURNIGY motors for all my boats and other cars.

nice motor put in mono 1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice motor put in mono 1

Turnigy b36 40 05 3900I bought this motor a month ago and made watercooling for it. Yesterday i heard a grinding noise like bearings are gone. Now it hasn't been on or in the water. Can the bearings be replaced on this motor. Also received another motor on 5/18/2010 and quiet like a church mouse. Same exact motor of the other. Thanks for your time and patience.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Turnigy b36 40 05 3900I bought this motor a month ago and made watercooling for it. Yesterday i heard a grinding noise like bearings are gone. Now it hasn't been on or in the water. Can the bearings be replaced on this motor. Also received another motor on 5/18/2010 and quiet like a church mouse. Same exact motor of the other. Thanks for your time and patience.

this motor failed first flight would not buy this again

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor failed first flight would not buy this again

Wielki may silnik. Ze te pienidze bardzo polecam. Wery Good motor for this coast

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wielki may silnik. Ze te pienidze bardzo polecam. Wery Good motor for this coast

Fitted to Stryker using a 3S 2200. Pulled 40amps with a 5x3 APC prop. Collective agreement from myself and several onlookers....Excessive Torque roll caused the massive Foam Explosion in a one point landing on Maiden flight. :(

(Yes it's possible it was other causes but the most likely.)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fitted to Stryker using a 3S 2200. Pulled 40amps with a 5x3 APC prop. Collective agreement from myself and several onlookers....Excessive Torque roll caused the massive Foam Explosion in a one point landing on Maiden flight. :(

(Yes it's possible it was other causes but the most likely.)

Very Good

But I need a cooler, hot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very Good

But I need a cooler, hot

i am using this motor on skyartech jet with a turnegy 3000mha 4s 40-50c pack and an 80A good brand speed controller with outburst of 100A, 6x5 apc prop on the first run it clocked 186mph on the second run it clocked 198mph, i am only new to these speeds and am sure that with some prop testing and more experienc it will go well over 200,nothing over heated great motor good price more testing on an ampometor coming soon run time unfortunatly 6 min

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i am using this motor on skyartech jet with a turnegy 3000mha 4s 40-50c pack and an 80A good brand speed controller with outburst of 100A, 6x5 apc prop on the first run it clocked 186mph on the second run it clocked 198mph, i am only new to these speeds and am sure that with some prop testing and more experienc it will go well over 200,nothing over heated great motor good price more testing on an ampometor coming soon run time unfortunatly 6 min

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!