New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy B36-40-07 2900kv Inrunner

Turnigy B36-40-07 2900kv Inrunner

Discontinued Product

Please continue searching for a similar product.
Weight:
199 g
SKU:
B36-40-07-2900
WANT FREE SHIPPING? Click here to find out more!

TURNIGY brushless Inrunner

Spec.
Kv: 2900rpm/v
Power: 375W
Turns: 7
Resistance: 21
Idle Current: 2.5
Esc: 45
Battery Config: 3-4S
Length: 42mm
Width: 36mm
Shaft: 5mm
Weight: 170g

  • SKU B36-40-07-2900
  • Brand -
  • Shipping Weight(g) 199.00
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 2900.00
  • Max Current (A) 0.00
  • Resistance (mh) 21.00
  • Max Voltage(V) 15.00
  • Power (W) 375.00
  • Shaft A(mm) 5.00
  • Length B (mm) 42.00
  • Diameter C(mm) 36.00
  • Can Length D(mm) 40.00
  • Total Length E(mm) 55.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Turnigy Dlux 70A sbec (timing high, freq 16KHz)
Turnigy Nano-Tech 3S 3300mA 25/50C (stayed at room temperature)
Prop Turnigy 5x5

Arround 66Ah 668W
After 1 minute almost 50 Celcius too much power to handle!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Turnigy Dlux 70A sbec (timing high, freq 16KHz)
Turnigy Nano-Tech 3S 3300mA 25/50C (stayed at room temperature)
Prop Turnigy 5x5

Arround 66Ah 668W
After 1 minute almost 50 Celcius too much power to handle!

Motor looks good, but came with barley hard turning bearings. But the reason why I only give 2 stars is the walt disn.ey like Mickey mou.e support. Asking them to tell me how to open the shields they answered:

......, Aug-12 10:41 (HKT):

Hi Melvin ,

Thanks for contacting the HobbyKing Support Team.

Regarding to your technical enquiry, customer service department staff are not qualified to give you advice. Please log in to our forum and look for the related topic. You may find some discussion and advice from the conversation. If you are not able to find any related topic, you can create a new topic and post your message, the other members will provide some recommendations to your inquiry.

The other otion is to send back the motor to china, but if I just order a new one, will be cheaper...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor looks good, but came with barley hard turning bearings. But the reason why I only give 2 stars is the walt disn.ey like Mickey mou.e support. Asking them to tell me how to open the shields they answered:

......, Aug-12 10:41 (HKT):

Hi Melvin ,

Thanks for contacting the HobbyKing Support Team.

Regarding to your technical enquiry, customer service department staff are not qualified to give you advice. Please log in to our forum and look for the related topic. You may find some discussion and advice from the conversation. If you are not able to find any related topic, you can create a new topic and post your message, the other members will provide some recommendations to your inquiry.

The other otion is to send back the motor to china, but if I just order a new one, will be cheaper...

recu et monter sur un ultrafunjet..catastrophe..l axe a bouger de 8mm puis le moteur surchauffe jusqu a bruler les doigts..sur 4s avec mastercrews 5.5par4.5devrais pas depasser les 60A..je dois en recevoir un deuxieme j espers quil serra ok..40frch sa fais cher le moteur..le controle qualite est mauvais.svp plus de controle.a part ceci la solidite a l aire bonne et la finission aussi..domage que l axe est de 5mm..4mm aurais ete suffisant

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

recu et monter sur un ultrafunjet..catastrophe..l axe a bouger de 8mm puis le moteur surchauffe jusqu a bruler les doigts..sur 4s avec mastercrews 5.5par4.5devrais pas depasser les 60A..je dois en recevoir un deuxieme j espers quil serra ok..40frch sa fais cher le moteur..le controle qualite est mauvais.svp plus de controle.a part ceci la solidite a l aire bonne et la finission aussi..domage que l axe est de 5mm..4mm aurais ete suffisant

2 of these motors in a traxxas villian boat w/ water cooling tubes, on 3s LiPo, stock gearing 2:1, bronze props. it's a great match-up for this boat. FAST! two trips running hard for over 20 min each time, no over-heating at all. 375-400 watts to each motor. top speed?.. unknown.. right now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

2 of these motors in a traxxas villian boat w/ water cooling tubes, on 3s LiPo, stock gearing 2:1, bronze props. it's a great match-up for this boat. FAST! two trips running hard for over 20 min each time, no over-heating at all. 375-400 watts to each motor. top speed?.. unknown.. right now.

a very fast motor, put it on a racing plane. rocket has

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a very fast motor, put it on a racing plane. rocket has

I have installed this engine on a Corally CCT 2WD pan car. It fits well. Looks nice, feels nice (heavy), sounds nice. A little cogging on very low speeds (like 2km/h), I guess that is normal, especially on only 2S. Works fine with the "Turnigy Brushless ESC 60A".

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed this engine on a Corally CCT 2WD pan car. It fits well. Looks nice, feels nice (heavy), sounds nice. A little cogging on very low speeds (like 2km/h), I guess that is normal, especially on only 2S. Works fine with the "Turnigy Brushless ESC 60A".

These turnigy motors are awesome.

Put a screw or two in the front endbell as some aren't glued.

Do not glue these because if you need to take the motor apart and change bearings or motoraxle this is possible.

I have many motors from this series

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These turnigy motors are awesome.

Put a screw or two in the front endbell as some aren't glued.

Do not glue these because if you need to take the motor apart and change bearings or motoraxle this is possible.

I have many motors from this series

super petit moteur , install sur un shockwave MHZ - K34,5 - zippy 3S4000 - seaking60 marine , environ 55kmh autonomie 17mn , ensemble non refroidi , au bout de la fin du pack , le moteur est froid (27), a ce demander si il avait tourner

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super petit moteur , install sur un shockwave MHZ - K34,5 - zippy 3S4000 - seaking60 marine , environ 55kmh autonomie 17mn , ensemble non refroidi , au bout de la fin du pack , le moteur est froid (27), a ce demander si il avait tourner

Messdaten Turnigy 36/40/07



Watts UP

Akku WinForce Lipo 3000/3S1P/35C

Regler 60A Noname



Variante 1:

Graupner CAM Speed 5,5 x 5,5

Stromaufnahme 63A

Watt 673



Variante 2

Graupner CAM Speed 5,5 x 4,3

Stromaufnahme 56A

Watt 617



Top Motor fr diesen Preis!

Einziges Problem:

Das vordere Lagerschild war nicht verklebt und lste sich beim ersten Testlauf,

wobei sich Motor, Regler und Akku gegenseitig aufrollten. Das Lagerschild mit

Loctite eingeklebt und das Problem ist behoben.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Messdaten Turnigy 36/40/07



Watts UP

Akku WinForce Lipo 3000/3S1P/35C

Regler 60A Noname



Variante 1:

Graupner CAM Speed 5,5 x 5,5

Stromaufnahme 63A

Watt 673



Variante 2

Graupner CAM Speed 5,5 x 4,3

Stromaufnahme 56A

Watt 617



Top Motor fr diesen Preis!

Einziges Problem:

Das vordere Lagerschild war nicht verklebt und lste sich beim ersten Testlauf,

wobei sich Motor, Regler und Akku gegenseitig aufrollten. Das Lagerschild mit

Loctite eingeklebt und das Problem ist behoben.

Fahre den an 3S in einem ExoCat.

Mehr als genug Leistung in dem kleinen Teil.

Preis Leistung wie immer Top.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fahre den an 3S in einem ExoCat.

Mehr als genug Leistung in dem kleinen Teil.

Preis Leistung wie immer Top.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!