The Turnigy B6 PRO Pocket Charger is a multifunctional, highly portable charger/discharger and balancer for Li-xx, Ni-xx and Lead Acid batteries.

It is packed with features that enable it to charge and monitor the state of your battery packs.

The B6 Pro is capable of charging up to 6 cell Lixx (1~15 Ni-xx) packs at 0.1~6.0 Amps.  It will charge from 0.1 to 6.0 Amps and this charger can store the data for up to 5 batteries in its internal memory for your convenience.

It features input voltage protection so as not to flatten your car battery at the field and temperature monitoring (probe not supplied.) It will also storage charge you packs for when you are not using them.

The B6 PRO can be powered by any suitable power supply delivering from 11~18V DC. It comes in a range of 4 bright colors for easy location and identification.

Features:
• Safety timer
• Capacity Limit
• Temperature monitoring
• Input power monitoring
• Individual cell monitoring
• 5 battery memory
• 2 Line back lit LCD display
• Built in Balancer to 6S packs
• Cycle charging/discharging (not available for Li-xx cells)
• Includes "FAST" & "STORAGE" Li-xx programs
• Easy to use

Specs:
Max output: 50W
Max discharge: 5W
Balancing current: 300mAh/cell
Input voltage: 10~18V DC
Ni-Cad / Ni-MH: 1~15 Cells
Li-Ion / Li-Po / Li-Fe: 1~ 6 Series
PB / Lead Acid: 2~20V
Charge current: 0.1~6.0A
Discharging current: 0.1~1.0A
Balance connectors: JST-XH connectors
No. of Cycles: Up to 5 Cycles (not available for Li-xx cells)
Dimensions: 137 x 74 x 26mm
Weight: 164g

Includes:
1 x Turnigy B6 Pro Pocket Charger
1 x XT60 Connector Charging Lead
1 x XT60 to Alligator Clip Adapter
1 x Input Alligator Clip Lead
1 x Glow/Futaba/JST adapter
1 x Comprehensive instruction manual


Power supply not included