Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

TURNIGY Bell TR2408-21 1400kv Outrunner

TURNIGY Bell TR2408-21 1400kv Outrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
87 g
SKU:
TR2408-2
Product
Description

The TURNIGY bell motor looks and runs exactly the same as the Towerpros, at 2/3 the cost!

Turnigy Bell TR2408-21 1400kv
Dimensions: 31 x 62mm
Weight: 58g
Power (W): 48
Turns: 21
Resistance: 420moh
Idle Current: .9A
Esc Required: 18A
Lipoly: 2-3S
Prop: 8x5 e-prop


Product
Specifications

Additional Information

  • SKU:
    TR2408-2
  • Brand:
    N/A
  • Shipping Weight(g)
    87.00
  • Length
    0.00
  • Width:
    0.00
  • Height:
    0.00
  • Kv(rpm/v)
    1400.00
  • Max Currents (A)
    0.00
  • Power (W):
    48.00
  • Length B (mm):
    33.00
  • Can Length D(mm)
    13.00
  • Max Voltage(V)
    11.00
  • Shaft A(mm):
    5.00
  • Unit Weight (g):
    58
  • Diameter C(mm)
    25.00
  • Total Length E(mm)
    61.00
  • Resistance (mh):
    420.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very poor power. Bought it to replace Dynam 400 in a EZ Hawk. Less powerful than the Dynam! Very soft shaft bent easily.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
motore economico ma adatto a piccoli aerei perfetto
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Niezy silnik, ale oyska mogy by by lepsze.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just pull full power for about 20 seconds and the motor start to smoke. This is not a good product. It sucks.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I really like these cheap TGY bells except for the weak shaft. I usually shorten them as much as possible and add any prop adapter. Strong, durable and good value for the bucks, long flight times with well balanced 7x5 or 8x4 with TGY Plush 18 or 25A hooked on a 3S1300mAh and aircrafts up to say 500g - works on heavier trainers too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fitted this with 8x6 E-Prop, 3 cell. End up with smoke coming out from the motor. Highly not recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
No gostei, comprei 5 e 3 queimaram na bancada de teste, horrvel......
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was surprised with how well this motor worked. I used it on a foam glider converted to RC with a turnigy 18A ESC and a turnigy 1300mah 25C 3 cell lipo. The plane had more than enough power with a GWS 8x6 prop. Unfortunately the radio failed and crashed the plane, resulting in the motor being ruined, so I didnt get to try it with a 8x4 prop. I definitely recommend this motor, I was impressed with the power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor. It is an ideal brushless upgrade for the greenplanes butterfly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bello robbusto e molto performante con elica 8*3,8
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.