Turnigy D3536/8 1000KV BrushlessMotor
Battery: 2~4 Cell /7.4~14.8V
Max current: 30A
No load current: 1.7A
Max power: 430W
Internal resistance: 0.052 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Prop size: 7.4V/11x5 14.8V/10x6
Max thrust: 1160g
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Tourne en 4s sur un Mini Talon, beaucoup de puissance en rab.Good quality and price.Good motor, powerful enough, well madeTrs bon produit. Achet pour propulser une aile FPV d'1,5 mtre. 20 minutes d'autonomie mi-gaz avec une 10x6 en 3S 2,8A et un controlleur Plush 25A.
Ce moteur est une Rolls.
Good product. Bought to suit a FPV wing 1,5m span. 20' of autonomy with 3S battery and 10x6 prop and Plush 25A ESC.
A Rolls Engine !betreibe den Motor mit 3s 2200 und 10X7 in der Extra 260. Habe damit eine gute Kombination Gewicht und Leistung gefunden.Motorparts good quality but one bearing already defect when arrived. The bearings as well as the shaft can only be changed by extreme force. If bearing is renewed take care where and how to press the new one in! Also very few glue between magnets and motor case!
If this motor would be mounted properly it would be a great value for the money.
I would suggest to check the bearings before use! A hint: They are similar to the Tamiya car bearings: 11mm diameterI've used this engine on my new skywalker. Great thrust, beyond what I expected. In addition it has a good consumption rate. I have flown FPV for more than 30 min with a 5000mAh lipo.This motor seems very well constructed and has a very nice finish. I haven't made any tests yet. I'll post them laterThis motor on a 800g to 1kg park flyer with a 10x7 on a 3 cell 2200 is quick. I like the 5mm prop. adapter as it is more resistant to bending upon impact.easy setup with included instructions. good quality product