New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy D3536/9 910KV Brushless Outrunner Motor

Turnigy D3536/9 910KV Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$20.28
Status:
In Stock
SKU:
D3536-9910
WANT FREE SHIPPING? Click here to find out more!
Turnigy D3536/9 910KV Brushless Outrunner Motor


Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 910kv
Max current: 25.5A
No load current: 1.5A
Max power: 370W
Internal resistance: 0.063 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/12x5 14.8V/10x7
Max thrust: 1050g


 
  • SKU D3536-9910
  • Brand Turnigy
  • Shipping Weight 155.0000
  • Packaging Length 80.00
  • Packaging Width 40.00
  • Packaging Height 50.00
  • Kv(rpm/v) 910.00
  • Max Current (A) 25.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 15.00
  • Power (W) 370.00
  • Shaft A(mm) 5.00
  • Length B (mm) 36.00
  • Diameter C(mm) 35.00
  • Can Length D(mm) 18.00
  • Total Length E(mm) 52.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Really fast delivery time, motor is installed in RC model with 11x5.5 prop, very reliable and good quality and price.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Really fast delivery time, motor is installed in RC model with 11x5.5 prop, very reliable and good quality and price.

Arrived right on time, works great with the 30amp ESC, spins a 11x8.5prop no probs,comes down cool and is Very Reliable, I would buy another!

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Arrived right on time, works great with the 30amp ESC, spins a 11x8.5prop no probs,comes down cool and is Very Reliable, I would buy another!

...... All are vibrating (run out). Proppelers are balanced. Motors run out also without propellers. NOT TO BUY IT (please check https://www.youtube.com/watch?v=UpDLKL7-Q3Q

Badly balanced props and prop driver are blame here. NOT the motors. IF the motors were out of balance, they would be OUT OF BALANCE all the time.The rotational mass of the motor does NOT change during running. HOWEVER rotational forces acting on the propeller and its mounting on the shaft are ever increasing their respective inertial forces as they rotate faster and faster. Actually BALANCE the untouched carbon prop, and you will find the problem reduces. Blaming the motor for your lack of prep is not really fair.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

...... All are vibrating (run out). Proppelers are balanced. Motors run out also without propellers. NOT TO BUY IT (please check https://www.youtube.com/watch?v=UpDLKL7-Q3Q

Badly balanced props and prop driver are blame here. NOT the motors. IF the motors were out of balance, they would be OUT OF BALANCE all the time.The rotational mass of the motor does NOT change during running. HOWEVER rotational forces acting on the propeller and its mounting on the shaft are ever increasing their respective inertial forces as they rotate faster and faster. Actually BALANCE the untouched carbon prop, and you will find the problem reduces. Blaming the motor for your lack of prep is not really fair.

heel goed motor en goedkoop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

heel goed motor en goedkoop

Very bad motors. I used it for octocopter. I bought 8 pc's. then another 2pc's. My octo crashed because carbon ends was broken. I found that motors are vibrating. So I bought another 3pc's. All are vibrating (run out). Proppelers are balanced. Motors run out also without propellers. NOT TO BUY IT (please check https://www.youtube.com/watch?v=UpDLKL7-Q3Q )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very bad motors. I used it for octocopter. I bought 8 pc's. then another 2pc's. My octo crashed because carbon ends was broken. I found that motors are vibrating. So I bought another 3pc's. All are vibrating (run out). Proppelers are balanced. Motors run out also without propellers. NOT TO BUY IT (please check https://www.youtube.com/watch?v=UpDLKL7-Q3Q )

Very good and powerful motor. Use it on my HAL 775 Hex with 4S setup with Turnigy 30A ESC. Motor only come warm with flying time about 7 min.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good and powerful motor. Use it on my HAL 775 Hex with 4S setup with Turnigy 30A ESC. Motor only come warm with flying time about 7 min.

ho acquistato questo motore, consigliato da HOBBYKING per il modello FLYBEAM il motore risulta troppo grosso, infatti non pu montare sul supporto motore del modello e non si pu neanche montare l'elica in dotazione perch ha un asse di soli 4 mm mentre asse del motore a un diametro di 8 mm
consiglio sbagliato

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ho acquistato questo motore, consigliato da HOBBYKING per il modello FLYBEAM il motore risulta troppo grosso, infatti non pu montare sul supporto motore del modello e non si pu neanche montare l'elica in dotazione perch ha un asse di soli 4 mm mentre asse del motore a un diametro di 8 mm
consiglio sbagliato

Very sturdy construction. Comes with all accessories needed for installation.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very sturdy construction. Comes with all accessories needed for installation.

good powerfull motor, don't care about the little ball bearing noise, it never gets stuck

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good powerfull motor, don't care about the little ball bearing noise, it never gets stuck

Im using these with a 1045prop, on 4s cells and with the HK Blue series 40A speed controllers on my modified Talon Hex, and they are run really good. Motors stay cool, have more then enough power. Flies like a dream.

Only complaint is the silicone cover on the wires is a bit fragile, and can easily be cut when threading it thru the carbon fiber tubes.. Other then that, cant go wrong!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im using these with a 1045prop, on 4s cells and with the HK Blue series 40A speed controllers on my modified Talon Hex, and they are run really good. Motors stay cool, have more then enough power. Flies like a dream.

Only complaint is the silicone cover on the wires is a bit fragile, and can easily be cut when threading it thru the carbon fiber tubes.. Other then that, cant go wrong!

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
Prop tests 2-4s 6-15" Download [315]
COPTER 259-03 Download [618]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!