Turnigy® dlux SBEC ESCs have set a new bench mark in quality and performance. Each ESC uses a twin PCB design separating the motor power supply, MCU and SBEC. This design allows for optimum component layout on each PCB and provides the ideal configuration for heat dissipation and thermal efficiency. Both PCBs are enclosed in a full aluminum heat sink casing to ensure maximum heat dispersion. All Turnigy dlux ESCs can be programmed via a programing card or by transmitter. Clear and easy to understand instructions are included.
*Now featuring data logging viewable when used with Turnigy dlux programming box.
Data logging display parameters:
Motor Run Time
Power on Time
Motor Pole Number
Max Motor RPM
Max Cont. Current: 100A
Max Burst Current: 120A
Max BEC Current: 3A
BEC Voltage: 5.5v
Max RPM (2-pole): 200,000rpm
Size: 69 x 33 x 23mm
Motor Plug: Female 4mm bullet Connector
Battery Plug: Nil
Extremely low internal resistance
Very low operation temperature
Over temperature protection
APEC MoSfets (Taiwain)
Battery Type: 2S~6S
LV Cut off Type (Ignore, Reduce Power, Stop Motor)
LV Cut off setting (2.5~3.5v in 0.1v increments)
Timing (Auto, Medium, High)
Active RPM Control: On/Off (Governor Mode)
Default factory settings.
Battery: LiPo Auto Detect
Low Voltage: 3.2v (power down motor)
Note: Programming box now available, check the related items below.
I use several D-Lux ESC's 55, 70, 100 and 120Amps. Never had any problems with it.
The data logger works fine with the Turnigy program box.I use several Dlux ESC's from 55 , 100 and 120 Amps.
Never had any problems with it what so ever.
Great feature is data logging (you need the program box!) Data logging only remembers the last flight, so if you want data check it after landing.bullet proof easy to use with programming box have taken these to the limit and never let me down. I have 4 already with more on the wayTURNIGY Delux ESC 100 amp. it's a beauty i install it in my hk500 helicopter w Typhoon motor almost no heat at all well done H-King very fast shippingworks great ,not using data logNice ESC at a great price.Im running mine on 6s to a Mad Thrust 1600KV 90mm Inrunner. This is on a Taft fan (HK Cobra). All works well and stays cool!ottimo e facilmente programmabile,accoppiato ad un turnigy sk3 fandrive super edf....un vero spettacoloSeems good, but lots of problems on youtubeBought with the scorpion motor, made well. programmer is strongly reccommededExcellent! The datalogging feature is working great. Bought from AUS warehouse. I get all the stats when I connect the programming box, which is very useful.