Convert your 9XR / 9XR Pro to DSSS Protocol (Direct Sequence Spread Spectrum) with the Turnigy DSSS Transmitter Module. DSSS systems are renowned for their anti-jamming / interference characteristics and their ability to share a single channel with multiple users. The DSSS system also offer less background noise and relative timing between transmitter and receivers.
The Turnigy DSSS Transmitter Module is designed to suit 5 pin JR compatible module based transmitters such as the 9XR and 9XR Pro at a fraction of our competitors price!
• DSSS 2.4Ghz Protocol
• Excellent anti-jamming / interference characteristics
• Less background noise and relative timing between transmitters and receivers
• Fits 5 pin JR compatible transmitters (9XR / 9XR Pro)
• Simple and easy to bind
• Highly efficient embedded antenna
Voltage Input: 6~15v
Power Consumption: 60mA
Power Output: <100mW
Module weight: 34.52g
Dimensions: 60 x 45 x 23mm
Application: Fixed Wing, Helicopter, Gilder
Frequency: 2.4GHz – 2.48GHz
Suggest Receiver: FS-R9A
Perfect combo for my 9XR Pro to use the 9x (V2) recievers. Truly a great product!I just bought this module together with 9xr Pro.I can easily bind to my HK T6A V2 receiver.
Cheap and nice product.This little gadget enables me to use all my Turnigy receivers that I used on my 9xThis module plugged into my 9XR easily and securely. It works and looks great. However I am concerned about the range of it. I am only getting about 100 meters with it. I lose signal and have had a couple of crashes. When I use the 9X type module with external antenna, I routinely fly out 400-500 meters with out problems.Hi, It work perfect with my 9XR-Pro. I fly only in LOS actually but 100m range minimum are tested fine ;) The receiver that I use with is the RX-9X8Cv2 and this is a great couple for some euros.Pracuje prawidlowo z T9XR PRO i firmwarem ersky9x mike 217.These modules DON"T work on the 9xr-pro unless you update the firmware! same problems occur as the flysky modules, when I put this module in my pro I could no longer switch it off!, I see by other reviews it's works on the 9xr ok, just not the standard 9xr-pro :-(my last review was removed by HK lets see how long this one lasts!I bought this for my 9xr-pro, BUT it has the same problems as the flysky module! it wont work properly in a 9xr-pro untill you update the firmware in the 9xr-pro!!!! I am no longer able to switch the transmitter off, I have to wait for the no use timer to cut in before it will shut off the transmitter!!!! .......DONT BUY THIS MODULE FOR THE 9XR PRO IT WONT WORK PROPERLY!!! I now have to put my frsky module back in the 9xr-pro and pay double $$$ for the Rx's...not happy Jan! more cra p for the j unk box....lucky it was cheap, can be a spare for my 9xr :-(The module engineering looks good. Also a very positive fit when plugged into the Tx module bay. No more dodgy RF connections (courtesy of re-used 9XV2 hacked modules, cannibalized from 9X Txs to put up with)! The range looks good and I think the reliability will be far superior to what I've had to put up with to date. This product is waayy late however (by a couple of years or so??).
I'd personally like to see an AFHDSV2 module for the 9XR/9XR Pros, (as an entry point into Rx telemetry data), without having to change Txs.great product.worked straight away in my 9xr with turnigy rx and the hobbyking 6 channel v2 rx.so far so good.