Get some BOOST out of your car!
Similar to the Kinetic Energy Recovery System (KERS) used in Formula One, the Turnigy ENOS Booster will pre-charge a small amount of power in the capacitors while the system is inactive. Once you activate the Booster (via spare radio channel), extra power will kick-in for a short period of time by increasing the voltage for the ESC.
You can control the Boost in real-time by using the 3Ch button on the radio.
Turnigy ENOS In-line Electronic Booster will give you a great advantage when you want to over-take your rival on the straight or have instant acceleration at the corner exit.
Input Voltage: 6-14v (2-3s LiPoly)
Maximum Capacitor Charging Current: 3.5A
Maximum Capacity Voltage: 3.5A
Freezing Time (Vcap < 0.8V): 2 seconds
Farad Capacity: 30F
Charge Time: 20 Seconds
Signal Pulse: >1300ms On, >1300ms Off
Connector: XT60 (male / female)
great buster for cheating the race track, a little confuse to use in the 3? channel but it needs some use to itYour new secret weapon! F1 DRS style!La caja de plástico es dura, pero fácil de desmontar al darse un golpe con el coche.Ha ha i fried the ESC running E-nos, not that i am complaining. like many of you i paid 10 units for a buck.,and the esc was a 8 dollar piece of sheep ESC.THIS ENOS IS awesome that 50pcnt gain ob both power & acceleration IF:
-compensate with set o4 bigger rims/tires( 50 pcnt circumference)
remove casing cut both plug, solder to the shortest length
-place unit neAr front to balanced weight gain .
MY @007 long retired drifted that top mybe at most 25 km/hr with a Brushed 540,40ampesc 2s lipo. now same hardware same changes above i get 35mph !! good as a brushless $200 RTR, i am so thumb up on this little wonder, you rule this round, HOBBYKINGI did a video review and this thing in awesome. Check it out.
https://www.youtube.com/watch?v=LavU1vzSgJAI was a little skeptical at first, but this product definitely works as advertised! Basically, it takes about 20 seconds for the capacitors to charge up to 11.7V at rest, then once the 3rd channel button is activated, then you get roughly 8.3 mAh of boosted juice. So for example, if your 2S powered car is pulling around 30A of current, then the booster should last about 1 second. I found my car to get about 15pcnt faster speed and acceleration as demonstrated here: https://www.youtube.com/watch?v=cLQ_pnVqT1U