The Turnigy FPV200 set is a complete, high quality all in one transmitter and camera package that comes ready to mount in your chosen model.
Complete with the LT200 is miniature high power video transmitter that packs 200mW of ultra-clean 5.8GHz power into a small robust unit. The LT200 has 32 available channels in the 5.8GHz band and weighs in at under 7g which makes it perfect for the high demands of 250 FPV racing where a clean, powerful system is essential.
Also included in the box is the Wide Angle 700TVL Mini FPV Camera with its 1/3" CMOS sensor that has been custom tuned for FPV use. This mini camera provides excellent video quality at low illumination and can be switched between NTSC and PAL as needed.
The provided wiring harness is ready to use and simply plugs into the camera and transmitter with power being supplied by either a suitably sized, JST equipped battery or by your flight control/distribution board.
For a great value, high performance, all-in-one FPV airborne package weighing in at under 32g complete the Turnigy FPV200 set is hard to beat!
• High power (200mW) micro transmitter
• 32 Channels
• Custom wiring harness
• Micro Sized
• Wide voltage range (7~23V)
• FPV tuned CMOS camera
• Simple installation
Transmitting Frequency: 5.6~5.9GHz
Operating Voltage: 7~23V
RF Output: 200mW
TV System: PAL/NTSC/SECAM auto
Connector: RP-SMA (NOT SMA)
Size: 29 x 20 x 8.5mm
Weight: 6.8g (without antenna and leads)
Operating Temperature: -10°C~+85°C
Band A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
Sensor: 1/3" CMOS > 700TVL
Horizontal Resolution: 700TVL
Lens: 2.6mm IR coated
Field of View: 127° diagonal 160° horizontal (ideal for a fixed camera)
Input Voltage: DC 3.6~5.5V (powered from VTX)
Power consumption: 60mA @ 5V
Operational temperature: -20~70°C
Connector Type: Mini Molex type plug
Dimensions: 29 x 24 x 17mm
LT200 FPV transmitter
Wide Angle 700TVL Mini FPV Camera
Custom wiring harness
No problem at all with this little set. It works perfect with the AOWAY receiver/recorder. Only funny is that I received on two different channels in the AOMWAY, with the transmitter on one channel. The right channel is perfect, and the dummy channel is also relatively good, but not good enough to trust. Some cross talking that is just interesting, but good to keep in mind to prevent surprises.I have this setup on a 500mm quad, on top of a stabilized platform shared with a gimbal. The dark/light handling of the camera is as good as any other CMOS I've seen, and the colors are vibrant without being over-driven. The transmitter does get quite warm, odd considering that I'm feeding it the low end of it's input spec (7-23V), from a filtered 12V BEC. The button on the VTx switches bands and channels quite easily, and I've run the spectrum of choices so far without any issues tuning my VRx. Paired with an Aomway 4-lobe antenna, video is rock-solid out to .5km, my distance limit so far. Because I'm running an OSD, I was happy the bundled harness was long, but I'd be unhappy with the length otherwise.
All in all, this kit represents incredible value. At the same price as individual cameras or VTx's, you get quality video hardware and 40 channels.very nice visual quality!! small camera and vtx!! i recommand this for your drone!Look good, but i'm not yet to get result test, hope can do testing soonWorks great, easy to set up. The plug and play cables are a little long for my taste but are easy to cut and resolder or just tuck away with some zipties.Very nice pack with a 700TVL wide view camera and transmiter at a very nice price!nice for mini/micro quads. good power and picture quality. i will try it on my 250s because its much smaller than irc or fatshark and seems equal qualitiy to meGreat setup for the price. Range is as good as my 200mw aomway. and my 500mw Fatshark Transmitter. At least here in the city. For the price it cant be beat. My only complaints are the lack of a heatsink and the camera is a little slow to adjust to light changes. Nice and clear tho.
I had to set my focus when it arrived because the set screw was never tightened.
Works with my fatshark predator v2 goggles and my RC832 receiver with no issues.