Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Turnigy G60 Brushless Outrunner 300kv (.60 Glow)

Turnigy G60 Brushless Outrunner 300kv (.60 Glow)

QTY:

Now save save $0.00 $0.00

$55.24
Rating:
Stock:
Weight:
532 g
SKU:
G60-300

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Designed to be a direct swap out for your .60 size glow engine. The Turnigy EasyMatch G60  brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.

Spec.
Battery: 5~7 Cell /18.5~25.9V
RPM: 300kv
Max current: 60A
No load current: 11V/1.2A
Current capacity: 60A/15sec
Internal resistance: 0.04 ohm
Weight: 360g  (not including connectors)
Diameter of shaft: 6mm
Dimensions: 81x50mm

Test Data:
18.5v - 14x10 prop - 17A - 1600g Thrust
18.5v - 15x8 prop - 17A - 1950g Thrust
22.2v - 13x8 prop - 16A - 1650g Thrust

Product
Specifications

Additional Information

  • SKU:
    G60-300
  • Brand:
    Turnigy
  • Weight(g)
    532.00
  • Length
    125.00
  • Width:
    90.00
  • Height:
    100.00
  • Kv(rpm/v)
    300.00
  • Max Currents (A)
    60.00
  • Power (W):
    1425.00
  • Length B (mm):
    59.00
  • Can Length D(mm)
    30.00
  • Max Voltage(V)
    26.00
  • Shaft A(mm):
    6.00
  • Unit Weight (g):
    360
  • Diameter C(mm)
    50.00
  • Total Length E(mm)
    81.00
  • Resistance (mh):
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
A really great motor for my seagull christen husky, wingspan 2m, 4,8kg flying weight.

I use it with a 16x10 3blade Master Airscrew @ 6s Zippy Lipo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a brute of a motor. I am running a 15x8 prop on 6S(22.2v) and its only pulling 25 Amp max. Haven't measured the thrust but it flies my Hangar 9 RV-8 with no worries and the slower larger prop sounds a lot better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing product, not only is the overall look of the motor high quality, but the preformance is as well. The mount it comes with is also really nice and is dpaces like the mount holes on most 60. Size engines so in some cases it will be a firect fit. The mounting hardware it comes with is also pretty nice, my only complaint is that it came with no plugs. Oh well. The eflite equivilant is twice the price and same preformance. A great product overall. Oh and p.s. ALWAYS USE BLUE THREADLOCK ON THE MOTOR MOUND AND PROP ADAPTER!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this motor today (from the US warehouse) for an air boat and immediately tried it out with a 16x6 prop, turnigy 150 amp esc and a 5000mah 6s lipo, and it ran great! the motor got just warm enough to be almost uncomfortable to touch and got the boat (a body board for the ocean with a tower screwed to it) to run along nicely at about 25 mph. The only problem I had with the motor was the mounting screws came loose but I should have used thread lock in the first place. I will try a few different props and post my results.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this motor today for an air boat and immediately tried it out with a 16x6 prop, turnigy 150 amp esc and a 5000mah 6s lipo, and it ran great! the motor got just warm enough to be almost uncomfortable to touch and got the boat (a body board for the ocean with a tower screwed to it) to run along nicely at about 25 mph. The only problem I had with the motor was the mounting screws came loose but I should have used thread lock in the first place. I will try a few different props and post my results.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.