TURNIGY, the name synonymous with performance, reliability and innovation is excited to release a powerful new battery chemistry in the Turnigy Graphene!
The Graphene Professional series is designed for professional UAV/RPA operators (unmanned Aerial Vehicle/Remotely Piloted Aircraft) and those that demand nothing less than the best.
Graphene batteries are unlike anything you have seen or used before.
Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies.
The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural enemy of batteries, Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life and performance.
We have a full range of Graphene Professional battery packs and will be adding new sizes/configurations as they become available. Turnigy Graphene batteries are the new standard for serious professionals who require POWER ON DEMAND.
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 15C Constant / 30C Burst
Weight: 936g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: 5.5 Bullet
Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+
• Graphene LiPo Batteries only require a standard Lipo battery charger.
Unit Weight (g)
Max Charge Rate(C):
Great battery, the presentation in the box was impressive. Cells are all balanced. Removed bullet connector's and replaced with XT90 as others have done. And works great on my hex setupGreat battery, the presentation in the box was impressive. Cells are all balanced. Removed bullet connector's and replaced with XT90 as others have done. And works great on my hex setupI absolutely LOVE these batteries. They don't seem to lose capacity over time nearly as much as traditional LiPo batteries. HK did a great job with these batteries and they are well worth the price. The packaging is fantastic, and mine came exactly at storage charge.
A word of caution: be careful with what connector and wiring you use with these batteries. XT-60 and 3.5mm bullets can only handle up to 60 amps, which this battery can easily exceed. I don't have anything that can use a 5.5mm bullet connector so I removed them and soldered on some XT-90's.
I use it with my Tarot 650 Sport frame and I usually get 20 minutes or more. Once I make some changes I should get even better flight times. I highly recommend these!Great packaging, very nice battery, came at storage charge (3.86/3.85/3.81/3.85), total weight including plug is 920g. It is pretty big, on my quad 1730g without battery, 750KV motors and 12*3.8 props the hover time is 16 minutes.batteria molto buona.... ma raccomando di controllare il voltaggio delle celle... perché la prima che avevo ricevuto aveva una cella difettosa... sostituita al volo da hobbyking