TURNIGY, the name synonymous with performance, reliability and innovation is excited to release a powerful new battery chemistry in the Turnigy Graphene!
The Graphene Professional series is designed for professional UAV/RPA operators (unmanned Aerial Vehicle/Remotely Piloted Aircraft) and those that demand nothing less than the best.
Graphene batteries are unlike anything you have seen or used before.
Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies.
The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural enemy of batteries, Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life and performance.
We have a full range of Graphene Professional battery packs and will be adding new sizes/configurations as they become available. Turnigy Graphene batteries are the new standard for serious professionals who require POWER ON DEMAND.
Voltage: 3S2P / 6 Cell / 11.1V
Discharge: 15C Constant / 30C Burst
Weight: 296g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: XT-60
Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life (reportedly in excess of 900 during testing).
• Graphene LiPo Batteries only require a standard Lipo battery charger.
Unit Weight (g)
Max Charge Rate(C):
i just received four 4000-3s 15c graphene battries, I could,nt understand why the packaging boxes are so large, firs off the box has a magnetic catch, (wow) open the box and see a sheet of foam, then you see the battry wrapped in bubble wrap and if that is not enough the battry itself was ibside a black velvet pouch with tie string, for god,s sake it,s a battry not diamonds, very very top class packaging, I checked each cell of each battry, all four are PERFECT!!! if this is hobbyking,s new standard, then keep it up, pure class, ok your heads got big so will leave, happy thumb twiddling garyExcellent quality, well balanced cells, XT60 connector, will be using in a large scale aircraft for receiver battery.These 15C gems outperform my 20C Turnigy Blues by a substantial margin. I recently bought a pair to try. I put them in series as a 6S battery and wow - more RPM, more watts and a weight savings of over 50 gms. as compared to the Turnigy blues. IR measurements show an IR close to 2 /- with very well matched cells. If their lifetimes are close to that of other graphene batteries, then these are a super valueIt's a good battery, 17minutes flight time with a phantom1.