Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Turnigy Heat Shrink Tube 40mm Blue (1mtr)

Turnigy Heat Shrink Tube 40mm Blue (1mtr)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
95 g
SKU:
WHS40-Blue
Product
Description
Great for protecting battery cells, plugs or covering an ESC.

40mm Heat Shrink Tube - Blue
Length: 1meter
Diameter: 40mm
Shrink ratio: 2:1
Product
Specifications

Additional Information

  • SKU:
    WHS40-Blue
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    95.00
  • Length:
    280.00
  • Width:
    40.00
  • Height
    200.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
very useful, cheap, for every wires or connectors, i use it for a long time..nice!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
5.Excellent product , on the money 110pcnt thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received in good condition. Good quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Masse 69 g au mtre semble un peu dur
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
40mm is the most common shrink wrap for 3s and 4s lipo batteries. I often solder my own packs from bigger lipos I got cheap.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tough rubber shrinks to about 20-25mm. Works well, but takes a lot of heat, so be careful when using on lipos even with a heat gun.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this size to packaging lipo 3s (about 1300-2200mAh)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bom material, vou usar para forrar as baterias LIPO 2200 3S da turnigy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Je trouve qu'il est un peu trop epais, il ne faut pas hesiter a le chauffer mais en faisant trs attention aux composants alentours
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Absolutely the best Heat shrink I've used. I always buy the 40mm and 50mm in 2 meter lots and use it for protection and marking my Lipos. Nobody walks away with mine by mistake anymore and it's so easy to use. Be careful with lipos though. They can only take so much heat before causing problems. Just take it slow and easy. The heat Shrink from HobbyKing seems to be double walled, it's so much heavier than standard Heat Shrink but it's shrinking capabilities are perfect and just about spot on 50 shrinkage. But it stops shrinking when you take the heat away so you're not crushing an ESC to death or cooking it. Use a slow steady flowing motion with the heat gun and don't try to shrink one spot at a time. Keep rotating the object and you will get a nice even shrinkage all over. Color code your lipos. Black for 7.4s Red for 11.1 Blue for 18's and Yellow for 22's. Great Heat Shrink at a good price.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.