New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy HV SBEC 5A Switch Regulator (8-42V input)

Turnigy HV SBEC 5A Switch Regulator (8-42V input)

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$9.61
Status:
In Stock
SKU:
HVSBEC
WANT FREE SHIPPING? Click here to find out more!

The Turnigy HV SBEC 5A Switch Regulator is perfect for large electric models using high voltage power setups. With its high voltage (8-42V) input capability, you will have the option to run this unit off of your main battery or off a separate 2-10S lipo. This voltage regulator will provide a sustained 4A output at 5V or 6V, and has a max current capability of 5A.

Give your RX and servos the power they need with this high quality HV SBEC by Turnigy.

Specs:
Input Voltage: 8-42V (2-10S Lipo)
Output Voltage: 5V or 6V (user selectable)
Max Load: 4A continuous/5A max
Weight: 21g
Dimensions: 59x10x25mm

  • SKU HVSBEC
  • Brand Turnigy
  • Capacity (mAh) -
  • Shipping Weight 37.0000
  • Packaging Length 95.00
  • Packaging Width 9.00
  • Packaging Height 75.00
  • High Voltage Regulator
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a nicely compact SBEC that has plenty of lead wire length to fit almost anywhere and connect to the receiver. It does not come with a battery connector so that you can solder on the connector of your choice. I soldered on a JST connector. I ordered two of these to replace the 4-cell alkaline receiver batteries in glow engine powered trucks with 3-cell LiPo packs that provide more current and no voltage drop to the servos.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

This is a nicely compact SBEC that has plenty of lead wire length to fit almost anywhere and connect to the receiver. It does not come with a battery connector so that you can solder on the connector of your choice. I soldered on a JST connector. I ordered two of these to replace the 4-cell alkaline receiver batteries in glow engine powered trucks with 3-cell LiPo packs that provide more current and no voltage drop to the servos.

NICE GOOD QUALITY SBEC FOR THE PRICE ITS A GOOD BUY ITS SMALL AND PRACTICAL

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

NICE GOOD QUALITY SBEC FOR THE PRICE ITS A GOOD BUY ITS SMALL AND PRACTICAL

buena calidad del producto, dando un voltaje exacto.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

buena calidad del producto, dando un voltaje exacto.

muy bune a fabricacion y buena calidad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

muy bune a fabricacion y buena calidad

der Regulator ist einfach Klasse.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

der Regulator ist einfach Klasse.

Works great for the price an can stand higher input-voltages! I use it for the watercooling-pump in my Spartan.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great for the price an can stand higher input-voltages! I use it for the watercooling-pump in my Spartan.

3cell it delivers 5,11vol and5,94 volt? same on 4cell. I have measured unloaded. Loaded 4cell 5,77 and4,96.. i used 12volt 21watt light bulb.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

3cell it delivers 5,11vol and5,94 volt? same on 4cell. I have measured unloaded. Loaded 4cell 5,77 and4,96.. i used 12volt 21watt light bulb.

Simple solution to supply a steady 6 volts to the RX.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Simple solution to supply a steady 6 volts to the RX.

Not too sure about the "switch" part or what it's intended for. It was the cheapest step down regulator that suited my needs, step down to 5v (will also step down to 6, it has a small jumper to toggle position). Very generous cable length.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not too sure about the "switch" part or what it's intended for. It was the cheapest step down regulator that suited my needs, step down to 5v (will also step down to 6, it has a small jumper to toggle position). Very generous cable length.

Turnigy HV SBEC 5A Switch Regulator (8-42V input)

1 Stunde probelauf mit 4 Digital Servos

10Kilo nur Handwarm Spannung unter Last 5,6V

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Turnigy HV SBEC 5A Switch Regulator (8-42V input)

1 Stunde probelauf mit 4 Digital Servos

10Kilo nur Handwarm Spannung unter Last 5,6V

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
UBEC5AHV3-10S.pdf Download [87]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking