This stylish fiberglass Mini-Quad features an integrated PCB frame, simply bolt on the motors then solder your choice of ESC directly to the frame!
A unique feature of this quad is the airplane-style fuselage structure that attaches to the frame. This gives it a very stylish look and is great for orientation while flying. It is also removable if you choose to fly without it.
An integrated power distribution system is also included making for one of the neatest electronics installs around. All mounting hardware and frame components are included in the kit. All you will require to have this quad in the air is four Turnigy Park 300 1080kv motors, four 10~12Amp ESCs, a set of 8x4 props (2 Clock wise and 2 counter clockwise) an 1000~1300mah 3s 11.1v Lipoly battery, a HobbyKing Multi-rotor control board and your own transmitter and receiver (Tx/Rx).
Light weight design.
Integrated PCB for tidy component installation.
Includes a full set of frame and mounting hardware.
Airplane-style fuselage structure for easy flight orientation.
Weight: 218g (w/out electronics)
4 x Turnigy Park 300 1080kv brushless motor
4 x 10~12Amp ESC
4 x 8x4 Prop (2CW & 2CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 1000~1300mAh 3s 11.1v Lipoly battery
Your own radio and 4 channel receiver
This is a really nice frame, it's a lot stiffer than the F330. I didn't bother with adding the extra tail/plane bits. I did add FPV gear to it and the fatshark cam fits nicely on the front. The landing gear is a little weak but a bit of superglue will sort out and little snaps.Very interesting frame but arms are not enough strong.
I bought a second one and i have doubled thickness of arms .
Now, this frame is indestructible. It supports hard crashs.
See my video on you tube fWknej5XltsEasy to build.Used everything recommended.Bought a K-2 board.I don't know much about Quads.I have no problems with this one.Flies great.
Good product Hobby King.Thanks.Nice frame! very resilient. I changed it to a tricopter and flies great. Also put a FPV once and it flew nice. Using the motors turnigy park300 1080kv and esc plush 12A, Lipo 1000mah 3S and KK2, 8x4 props (buy extra motor, esc and propellers). Will try to post a picture. Price a bit expensive, otherwise would buy more. RegardsVery easy to construct, and has great features by integrating the circuit boards into the frame. makes for a very streamlined and simple build.
The landing gear is very fragile and will break easily on any less than perfect landings. I made new Aluminium LG after breaking them both off, and mounted them to the frame bolts.
Would be handy if the intructions detailed the electronics fitout as well. I ended up building it twice to get the electronics in.An awesome little flyer ... Followed all HK recommended gear & using CC3D. I get 10 mins flite out of a 3S 2200mAh. Can fly slow and fast. Great for down the park.This little thing is awesome. Very well made material. Very stable, there a little bit heavy perhaps but this otherwise is good for the wind sensitivity. My Copter weights RTF with a 1000mah 3s battery 550g.
The Motors have lots of power. Flew this thing with a 3s2200mah battery as well. Had no problems at all!
Definetly a good deal.It's a great mini quad. It is a very strong and stable.
It's a small, portable and simple thing for fun!!
I carry it always in my car and can fly any time.
See my video!