Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

TURNIGY K-Force 80A Brushless ESC

TURNIGY K-Force 80A Brushless ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
115 g
SKU:
KF-80A
Product
Description
The Turnigy K-Force series are based on an all new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.
 
Specification: 
Output:  Continuous 80A, burst 120A up to 10 seconds.
Input Voltage:  2-6 cells lithium battery or 5-18 cells NIMH battery.  
BEC:  Switching mode DC-DC regulator.  3A@5.25V or 3A@6V switchable by user progromming.
Control Signal Transmission: Optically coupled system.
Max Speed:    
   2 Pole: 210,000rpm
   6 Pole: 70,000rpm
   12 Pole: 35,000rpm
Size:  70mm (L) * 34mm (W) * 16mm (H).
Weight:  77g.
 
Features:
*High performance microprocessor (24khz) brings out the best compatibility with all kinds of motors and the highest driving efficiency.
*Wide-open heatsink design to get the best heat dissipation effect.
*Improved Normal, Soft, Very-Soft start modes, compatible with aircraft and helicopter.
*Smooth, linear, quick and precise throttle response.
*Throttle signal transfered through optically coupled system to avoid the electromagnetic interference.
*Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
*Governor mode for helicopter. 
*The firmware of the ESC can be updated through the USB adapter.
*User programmable via Tx, Programming card or pc USB port. .
 
*Not compatible with non 'K-Force' esc programming card.
Product
Specifications

Additional Information

  • SKU:
    KF-80A
  • Brand:
    N/A
  • Weight(g)
    115.00
  • Length
    0.00
  • Width:
    0.00
  • Height:
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good value speed controller,

Have it fitted in a HET F20, with a wemotec mini fan and hacker B40-8L, 1000watts, speed controller got warm but not hot, worked for me straight out of the box, didnt need to program. So can't say much about that side of it.

My watt meter had the motor pulling about 68amps, but the battery voltage was down slightly, so i suspect on a full battery it will be around 1100 Watts. will give full review when i maiden her
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.