The Turnigy 3A ESC is a lightweight brushless speed controller designed for single cell applications.
Weighing in at just 1gram its still equipped to deliver snappy throttle response and excellent low speed timing.
This brushless esc is only to be used for Lipoly single cell applications where no more than 3A constant is needed.
High speed MCU.
signal lost failsafe.
Supports 240,000RPM (2 poles) / 40,000RPM(12 poles)
Cont. Current: 3A
Burst Current: 4A
Max Voltage: 4.2v
Please be careful when using this product. Due to it's size and delicate nature it is easy to overload this ESC. Only use single cell Lithium Polymer batteries and never draw more than 3Amps or never more than 4A for more than 10 seconds.
I find this product to be horribly inconsistent. I have bought up to 12 currently. Now, I'm down to just one ESC that works, not exaggerating. Either the ESC doesn't work out of the box or it does a few runs and then smoke appears and it's done, or it would just not work after being left on its own. I ran it with the right motor - up to 3A max and 2.5A continuous but it will not run right. Highly inconsistent ESC, will strongly recommend against it.Ist super top!!!!!
Mit Blheli gesflash geht einwandfrei an meinen mcpxTop micro ESC for buddy-price. Unfortunately this ESC seems to have no buddy-codes anymore.
Replace Mosfets for use as main ESC in small microhelis. Stock mosfets are weak.les 206b ne sont pas bien calibrs, le CPU ne tiennent que 3.6Volts alors qu'une batterie 1S bien charge fait 4.2Volts.
hobby king a-t-il chang de fournissur pour cet ESC?
comment savoir si ce sont actuellement encore des 206b qui sont en vente?Non acquistate questo prodotto per l'mcpx, a me hanno mandato la versione 206b, inservibile......I bought one of these esc a few years ago. I never could figure the thing out. So of anyone could be kind enough to tell me how to program this esc. I would thankfulGreat and light ESC perfect for single cell micro aircraft. I recommend getting this ESC out of the packing over a white paper so you don't loose it, it is tiny and it really weight the stated 1 gram.Is there a manual for this DP 3A controller? Connection and use information? Anything? I am feeling a little lost here....This ESC is good for the "HobbyKing AP-02 7000kv Brushless Micro Motor".
Do NOT connect ESC directly to receiver with 5V output. It will be alive, but motor can't rotate at maximum speed. Motor will work a short time, and stops after it. After restart it's repeats.
ESC working good with 1S LiPo connected directly to the it's terminals.
Very tiny and light. Can be made lighter by removing the connection pins and soldering directly to the board. Works perfectly well with ADH30S out of the box.