TURNIGY marine ESC's are built with USA IR mosFET's for long run times and less heat.
Boat esc's have a different requirement to air or car esc's. Their need for sustained high-amp draw makes plane esc's unsuitable and car esc's with large amp spike capability, unnecessary.
Thats why TURNIGY marine esc's are designed purely for boats, and coated in anti-static then water resistant laquer to prevent shorting should the esc get wet. They can handle sustained high amp/volt loads and handle heat better than a car or plane esc.What makes this ESC better than others?
-Well designed MCU, with efficient code makes for faster sync and accurate timing.-Fast clock cycle MCU combined with efficient code means 100,000rpm cpu cycle*
-Efficient FET's reduce heat and deliver sustained switching at high amp/voltage.
-Well designed PCB (6 layer) and circuit diagram handles high-amp without burnout.
-Large motor comptability. Smooth starts, linear throttle curve.-Active water cooled heatsink that actually works.
Low Voltage (none/2.6v/2.8v/3v/3.2v/3.4v)
Constant Current: 60A
Burst Current: 380A
Battery: 2-3S Lipoly
BEC: 6v/ 1.5A
Motor Type: Sensorless Brushless
Size: 31.5 x 27.5 x 16mm
A really solid product at least as good as it's more expensive rivals. I suspect it can take more amps than its rating suggests. I've been using it for a while now and it's been very reliable.I bought this speed controller for my sons 680mm power boat. We used the 2848SL 3900kv Brushless motor. The esc never got warm. We did have the water cooling connected. The boat had an excellent top speed. Very pleased with this and would reccomendI bought this for a 680mm brushless power boat. Was drawing 40 A so this esc was no problem. Never got warm. Had the water cooling connected up. Very pleased with it.nice product from hobbyking thks hobbyking mmmmmmmmmmmmI bought two of these for two boats. Setting up one, right into programming mode and was able to use the transmitter to set it. The second one, after 2 days will not enter programming mode. I haven't a clue why. From my experience with the second one, the programming card is worth buying.Erg goede en fijne regelaar. Vooraf instellingen zijn prima, dus het is plug and play. Waterkoeling ziet er degelijk uit en het grootste voordeel: deze regelaar is werkelijk 100pcnt waterbestendig. Na een flip zonk mijn flatbottom utility tot zijn neus onderwater. De regelaar heeft 30min ondergedompeld gelegen. Thuis de krimpkous eraf gehaald, regelaar laten drogen. Daarna voorzichtig schoongeborsteld en hij werkt nog!
let wel op: afmetingen zoals genoemd kloppen niet. De regelaar is een stuk langer!Hi bought 2 for my sons dragon mini cat 820ep brushless boat first run everything is fine it has dual 28mm 2810kv motors run on dual 3s LIPO do another review in 2 months still see if everything is still going ok, , TURNIGY 3600 kw, 4000ma\h . , .mine took a crap after 3 runs, dont risk itPerfect in the podracer, much better then the original. Startup is very smooth and endless power