Turnigy MCR Series electronic retract systems feature an all metal construction and advanced micro controllers with an integrated circuit to automatically stop the retract and recover from jamming problems. The integrated circuit also protects against over-current draw. Turnigy MCR series retracts also feature working suspension, steerable nose wheel and all hardware required to install the retracts in your plane.
Nose Wheel: 35x10mm
Nose Strut: 114mm (From pivot point to bottom of wheel)
Main Wheel: 45x12mm
Main Strut: 120mm (From pivot point to bottom of wheel)
Mounting plate: 29x28mm (Main) 43x28mm (Nose)
System weight: 176g (Inc all wires and hardware)
AUW Load: 2.7kg
Current draw: 0.32A for 2 sec
Quality is superb. I would trust these on any 90mm edf jet. They are unbelievably sturdy and the machining is stellar. The tires are hard but get some softer ones but really you don't need them as these are all ready compression struts.Beautifully made. Very strong. Lock into both positions with no slack. The Oleo Legs are sprung and look very realistic. Nice slow scale speed.
Tip.... If you remove any of the M3 x 4mm Grub screws. Only use a new Allen key to remove them. The grub screws are a little slack on the Allen key. If you use a worn key. You will strip them as they are in quite tight. When reassembling. Use new grub screws. You can get em off the Bay.Don't put the old ones back in or they will strip.
Check all posi screws as many of mine were a bit loose out of the packaging. Finger tighten only with very light locktight.
Made of Chinese Aluminium. Which is basically a bit of Alloy and a heap of old Baked Bean Tins mixed in.Have not used them in flight yet but tested them and seem to be working veeeery well. The Viper 90 mm EDF jet needed some reconstruction to receive these retracts.Great retracts and they are stamped RC Lander in the metal body. Nice slow, scale speed and very sturdy.Recived these today , excellent Good work Hobby King
well the retract unit it self is only 3 gram's more that
the standard plastic unit - and these work so much better
the units them self's are also slightly smaller then plastic
units - these are going to be installed in my Venom
70 mm F-86 to replace the crappy air retracts
will then give them a workout , but from first impression
they look and work great