Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Mega 300w 8s Balance Charger/Discharger (150w x 2)

Generating Links

Turnigy Mega 300w 8s Balance Charger/Discharger (150w x 2)

Price:

Now save save $0.00 $0.00

$89.70
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9052000035
want FREE shipping? Click here to find out more!

Tired of carrying two chargers to the field? Need serious charging power without the hassle of multiple chargers? Then the Turnigy Mega 300w is the charger you have been waiting for!

This charger features 2 independent 150w chargers inside a single case, that’s a total of 300watts charging power! The Mega 300w is capable of charging 8s Lipo packs at 5.1Amps or 27 Nixx cells at 4.6Amps. Each output is independent and although this charger features universal balance ports; a JST-XH balance board has been included for balancing Li-XX batteries. It even features optional temperature sensing ports (sensors sold separately) which will monitor the battery temp during the charge process – great for getting the most out of Ni-XX cells.

The Turnigy MEGA 300w alloy case has cooling holes on top and dual temperature controlled fans to keep the internal temps low. This is a well thought out dual charger at a great price!

Note: You will need a power supply exceeding 30Amps for bench top use!

Features:
• Dual power output 150Wx2 (300W total)
• Supports Li-XX, Ni-XX and PB batteries
• Store up to 10 battery settings
• Large cooling holes on the top edge of the case
• Dual temperature controlled cooling fans
• Wide input voltage range (11~18VDC)


Specs:
Charging Output: 2 x 150W (300w Total)
Input Voltage: 11~18v DC
Charge Current Range: 0.1~7.0A
Discharge Current: 0.1~5.0A
Discharge Power: 2x50watt
Balance Current Drain: 200mAh/cell
Li-XX Cell Count: 1~8s
Ni-XX Cell Count: 1~27cells
Pb Battery Voltage: 2~36v
Battery Setup Memories: 10
Intelligent Temp Control: Yes
Cooling: Dual Fan
Weight: 903g
Dimension: 188x136x58.5mm     


Includes:
1 x JST-XH balance board
1 x Alligator clip charge lead
1 x Tamiya style charge lead
1 x Jr/Futaba Rx charge lead
1 x 4mm bullet connector pig tails (fit your own connectors)
1 x Power input alligator clip pair 

**User manual under the Files tab below

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Keith | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 24, 2016

Arrived with only 1 working fan so the charger will overheat and shut down at times depending on what I am doing with it.

Also, the voltage readout is not consistent. The total voltage sometimes reads 0.1 to 0.2V higher than the sum of each cell and fluctuates a lot more than it should be. Because of this I really don't trust this charger. Since it only over-estimates the voltage, all that really happens is the charge rate gets slowed down sooner. Still, by the time the charger finishes, the batteries always seem to be properly charged.

Bottom line: I don't trust it.

kommdi | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 01, 2015

be careful...discharge power is only 2x25 Watts not 2x50 Watts !! Received mine today...otherwise well build quality!

ERDAL | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 10, 2015

It killed my lipos. The first cells of all my lipos died because it charced first cells 4.30 volt. It couldnt balans. My gens lipos were rubbish.

Raigo | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 23, 2014

Very nice quality and i'ts reliable! I'm very satisfied with this charger.
I'm charging my ebike batteries with it. I also tried to charge NiMh batteries. Everything works!

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 14, 2014

Great charger, 2 independent charging channels makes this a very handy tool, Highly recommended charger, great quality/price ratio.

Ashley | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 07, 2013

Build quality is superior. Fan only comes on from time to time charging at 2 or 3 amps. You do hear the fan when it comes on but it is not a whining sound some have described with the other units. This has definitely been engineered with care. Notice sides use machine screws. Fit and finish is very good. I cant promise the electronics will hold up- but I can promise you mine works (both sides) and you will be pleased when you open the box, as long as you like green and want a 2 x 8S charger with only 1 charge board. Mine also came with several premium quality adapters in a superior foam package. Did I mention I was pleased?

chris598150 | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 06, 2013

super chargeur pratique puisant

Ingar | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 21, 2013

This charger works perfect for my use when charging 2pcs 6s 3300mah batteries at once. and the charge time on 7AMPx2 is under 30minutes.

I also got the 540watt 30amp hobbyking power supply with this charger.
And i'm very happy with the combo.

mumpf | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 17, 2012

sollte halten was es verspricht. werde es fr meine 6S 5000mah akkus verwenden.

mein alter 50W lader konnte nur mit 2.2A laden. Hoffe auf bessere ladezeiten so

Poscis | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 18, 2012

Very happy with the charger! It delivers as promised altough the fan noise is a little loud. And also this is a dual charger.. Why not include two balance boards? Anyways for the the price it's an easy 5 out of 5 stars!

Customer files
Manual Download [4372]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories