Become a Dealer Blog
Language
ENG
USD
Selected Country:
[["US","AU","GB","DE"]]
    Register

    Total Price

    $0.00

    Cart 0 Cart 0 Loading...
    Display : All categories 9 Batteries / Chargers 764 Chargers 62 DC Only 16

    Turnigy Mega 300w 8s Balance Charger/Discharger (150w x 2)

    Turnigy Mega 300w 8s Balance Charger/Discharger (150w x 2)

    You will earn 71 bonus points for buying this item.

    Generating Links

    Turnigy Mega 300w 8s Balance Charger/Discharger (150w x 2)

     
    Price:

    Now save save $0.00 $0.00

    $89.70
    Already Purchased Discontinued Product

    Please continue searching for a similar product.
    1 year warranty
    SKU:
    9052000035
    Discontinued Product
    Please continue searching for a similar product.
    want FREE shipping? Click here to find out more!
    Report Issue Not Cheapest?

    Copy and Share the Below URL

    Product Description

    Tired of carrying two chargers to the field? Need serious charging power without the hassle of multiple chargers? Then the Turnigy Mega 300w is the charger you have been waiting for!

    This charger features 2 independent 150w chargers inside a single case, that’s a total of 300watts charging power! The Mega 300w is capable of charging 8s Lipo packs at 5.1Amps or 27 Nixx cells at 4.6Amps. Each output is independent and although this charger features universal balance ports; a JST-XH balance board has been included for balancing Li-XX batteries. It even features optional temperature sensing ports (sensors sold separately) which will monitor the battery temp during the charge process – great for getting the most out of Ni-XX cells.

    The Turnigy MEGA 300w alloy case has cooling holes on top and dual temperature controlled fans to keep the internal temps low. This is a well thought out dual charger at a great price!

    Note: You will need a power supply exceeding 30Amps for bench top use!

    Features:
    • Dual power output 150Wx2 (300W total)
    • Supports Li-XX, Ni-XX and PB batteries
    • Store up to 10 battery settings
    • Large cooling holes on the top edge of the case
    • Dual temperature controlled cooling fans
    • Wide input voltage range (11~18VDC)


    Specs:
    Charging Output: 2 x 150W (300w Total)
    Input Voltage: 11~18v DC
    Charge Current Range: 0.1~7.0A
    Discharge Current: 0.1~5.0A
    Discharge Power: 2x50watt
    Balance Current Drain: 200mAh/cell
    Li-XX Cell Count: 1~8s
    Ni-XX Cell Count: 1~27cells
    Pb Battery Voltage: 2~36v
    Battery Setup Memories: 10
    Intelligent Temp Control: Yes
    Cooling: Dual Fan
    Weight: 903g
    Dimension: 188x136x58.5mm     


    Includes:
    1 x JST-XH balance board
    1 x Alligator clip charge lead
    1 x Tamiya style charge lead
    1 x Jr/Futaba Rx charge lead
    1 x 4mm bullet connector pig tails (fit your own connectors)
    1 x Power input alligator clip pair 

    **User manual under the Files tab below

    Product Specifications
    Videos
    Upload video

    Only registered users can upload video. Please, log in or register

    Discuss 0
    Topics
    Sort by
    Most Recent Topics
    * Nickname:

    * Your Reply:


    Please, enter the text shown in the image into the field below
    CAPTCHA Image
    *Verification Code:
    Cancel
    Submit
    Post a new Topic
    * Nickname:

    * Your Topic:



    Please, enter the text shown in the image into the field below
    CAPTCHA Image
    *Verification Code:
    Post Topic
    Reviews

    Only registered users can write reviews. Please, sign in or sign up

    Keith | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    Jan 24, 2016

    Arrived with only 1 working fan so the charger will overheat and shut down at times depending on what I am doing with it.

    Also, the voltage readout is not consistent. The total voltage sometimes reads 0.1 to 0.2V higher than the sum of each cell and fluctuates a lot more than it should be. Because of this I really don't trust this charger. Since it only over-estimates the voltage, all that really happens is the charge rate gets slowed down sooner. Still, by the time the charger finishes, the batteries always seem to be properly charged.

    Bottom line: I don't trust it.

    kommdi | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    May 01, 2015

    be careful...discharge power is only 2x25 Watts not 2x50 Watts !! Received mine today...otherwise well build quality!

    ERDAL | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    Mar 10, 2015

    It killed my lipos. The first cells of all my lipos died because it charced first cells 4.30 volt. It couldnt balans. My gens lipos were rubbish.

    Raigo | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    May 23, 2014

    Very nice quality and i'ts reliable! I'm very satisfied with this charger.
    I'm charging my ebike batteries with it. I also tried to charge NiMh batteries. Everything works!

    | Verified Buyer

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Feb 14, 2014

    Great charger, 2 independent charging channels makes this a very handy tool, Highly recommended charger, great quality/price ratio.

    Ashley | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    Jun 07, 2013

    Build quality is superior. Fan only comes on from time to time charging at 2 or 3 amps. You do hear the fan when it comes on but it is not a whining sound some have described with the other units. This has definitely been engineered with care. Notice sides use machine screws. Fit and finish is very good. I cant promise the electronics will hold up- but I can promise you mine works (both sides) and you will be pleased when you open the box, as long as you like green and want a 2 x 8S charger with only 1 charge board. Mine also came with several premium quality adapters in a superior foam package. Did I mention I was pleased?

    chris598150 | Verified Buyer

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    May 06, 2013

    super chargeur pratique puisant

    Ingar | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    Apr 21, 2013

    This charger works perfect for my use when charging 2pcs 6s 3300mah batteries at once. and the charge time on 7AMPx2 is under 30minutes.

    I also got the 540watt 30amp hobbyking power supply with this charger.
    And i'm very happy with the combo.

    mumpf | Verified Buyer

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Dec 17, 2012

    sollte halten was es verspricht. werde es fr meine 6S 5000mah akkus verwenden.

    mein alter 50W lader konnte nur mit 2.2A laden. Hoffe auf bessere ladezeiten so

    Poscis | Verified Buyer

    • Overall
    • Quality
    • Value

    Customer Rated

    Nov 18, 2012

    Very happy with the charger! It delivers as promised altough the fan noise is a little loud. And also this is a dual charger.. Why not include two balance boards? Anyways for the the price it's an easy 5 out of 5 stars!

    Manuals/Files
    Customer files
    Manual Download [4372]
    Upload your file

    Only registered users can upload files.
    Please log in or register to start helping your fellow hobbyists today!

    Need Help
    Live chat

    © 2025 HobbyKing. All Rights Reserved.