TURNIGY MEGA 400W Lithium Polymer Battery Charger
TURNIGY MEGA 400W Lithium Polymer Battery Charger
Copy and Share the Below URL
Are you ready for 400W and 20A charge rates for your high C charge rate capable Turnigy/Zippy packs? We know the answer is "YES!", so we offer you the Turnigy Mega 400W high power balance charger!
The Turnigy Mega 400W is a high power balancing charger/discharger which can handle up to 6 cells LiPo/LiFe and NiMH/NiCd up to 18S accurately. Bundled with the Turnigy Mega 400W is an array of charging wires and plugs, suitable for most applications.
Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing charge & discharge
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
High-power and high-performance circuit
Store function, allows safe storage current
Data storage (Store up to 10 packs in memory)
Cyclic charging/discharging
Note: Temperature sensor not included.
Spec.
Input voltage: 11.0 – 18.0Volt
Charge current: 0.1 – 20.0A
Discharge current: 0.1 – 5.0A
Maximum charge capacity: 400W @ input voltage >15V
Maximum discharge capacity: 25W
Current drain for balancing Li-po: 200mAh/cell
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 – 6 series
NiCd/NiMH battery cell count: 1 – 18 series
Pb battery voltage: 2 –24V
Battery setup memories: 10
Intelligent temperature control: Yes
Weight: 812g
Dimensions : 145x145x56
Including;
1 x Turnigy Mega 400W V2 charger
1 x JST XH Adapter
1 x Banana plug w/male XT60
1 x XT60 w/Glow Ignitor Plug
1 x XT60 w/aligator clip
1 x XT60 w/female JST
1 x XT60 w/female Futaba
1 x Aligator clip for charger input leads
This charger has a JST-XH balancing plug, which makes it compatible with Zippy, TURNIGY and any pack with a JST-XH balance lead.
Note: Power supply and temperature sensor not included.
manual | Download [1343] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!