Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy MG958 Composite Digital Metal Gear Servo 15kg / 65g / 0.2sec

Generating Links

Turnigy MG958 Composite Digital Metal Gear Servo 15kg / 65g / 0.2sec

Price:

Now save save $0.00 $0.00

$18.35
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
TGY-MG958
want FREE shipping? Click here to find out more!

Turnigy MG958 Composite Digital Metal Gear Servo 15kg / 65g / 0.2sec

TGY-MG958 spec.
Control system: +pulse width control 1520usec neutral
Required pulse: 3-5V peak to peak square wave
Operating voltage: 4.8V
Operating temperature range: -20~+60C
Operating speed: 0.2sec / 60 degree at no load
Stall torque @ 4.8V: 166 oz/in. (12.0kg.cm)
Stall torque @ 6.0V: 200 oz/in. (15.0kg.cm)
Operating angle: 45 deg. one side pulse travelling 400usec
Direction: Counter clockwise/pulse travelling 1520-1900usec
Motor type: Coreless motor
Potentiometer drive: Indirect drive
Bearing type: Dual ball bearing
Gear type: All metal gears
Connector wire length: 12in
Dimensions: 40.2 x 20.1 x 36.8mm
Weight: 2.24oz. (65g)

  • Servo Torque(kg)(min. 0.01kg) 15.00
  • Servo Speed (Sec/60deg) 0.20
  • Servo A(mm) 43.00
  • Servo B(mm) 40.00
  • Servo C(mm) 38.00
  • Servo D(mm) 20.00
  • Servo E(mm) 55.00
  • Servo F(mm) 26.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

joseph | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 29, 2013

I have been using this servo now for more than 2 years on my 1/8 onroad car on steering and found it very good the gears are durable because they are metal but first it was little bit noisy but more I used it the noise reduced I can asure that it has coreless motor 15 kg and it is faster than 0.20. I have branded servos that cost over 100 euros each and compared to this servo they have nothing special so I will recomend it.

Francois | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2012

I bought 2 TGY-MG958 for a steering servo on my Losi 8 2.0 Brushless.
After about 4 hours, the first servo has blown and broke my receiver !!!
The second one , after only 2 hours, doesn't brake enaugh ...

yak 54 | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 26, 2012

I bought 5 of them and I binned two ,they were wobbling in neutral, they are rubbish.
Also Hobby king should get their act together customer help stinks

Roeland | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2012

I bought theses servo's, to see if they at least work Reasonably good.. I've put 1 in my Kyosoh UltimaSC, and 2 in my crawler..
So far I'm happy with the performance.. They seem more precise then the stock servo's.. At this price they seem like good value to me

wishkybravo | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 18, 2012

Received my servo and was very happy with the product from the point of view, but with the maiden I lost my 50cc Porter plane cause of poor electronic quality and after I inspect the servo that cause the crash, I've realized that the IC's come lose just because of the gas motor vibration. The servos was installed with crommets and screws that come with the product. NOT HAPPY AT ALL!

TzGarden | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 02, 2012

I love these servos, fast and strong, use five of them in my TZ 50 and it works great! Even with the Solid G mini gyro and KDS flymentor3D.

smokin ace | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 28, 2012

a super servo very strong and good power centres well i am using this as a steering servo in my 1/8 scale buggy and does the job very

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 22, 2012

plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

mikelleen | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 21, 2012

I have 6 of these for sale brand new, in USA.



They are good servos, as posted by other reviewers on this site.



Purchased these about 3 months ago for my 100cc airplane, but I am now going with 7 volt servos. These servos go 4.8 to 6.0 volts.



I can be contacted at miklleenAThotmailDOTcom

preman | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 02, 2012

I've bought it a year ago, I plug in TT01ED but i use my kit for a rally in my backyard. and eventually died three days ago, hahhaa .. overall this is the best servo performance and best price for a highly capable servo thanks HK

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
No File Name Download [53]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!