Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy MG959 Alloy Digital Metal Gear Servo 15kg / 75g / 0.2sec

Generating Links

Turnigy MG959 Alloy Digital Metal Gear Servo 15kg / 75g / 0.2sec

Price:

Now save save $0.00 $0.00

$24.99
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
TGY-MG959
want FREE shipping? Click here to find out more!

The Mad Max of servos.
Milled from a single block of 6061 alloy*, this servo screams "crazy tough"!
The milled alloy MG959 carries as much attitude as it does torque and robustness.
Why did we bother making a CNC milled 6061 alloy servo and then charge less than 25 bucks for it?...
Beause we can!
No amount of R/C truck bashing or plane crashes will distort this servo's case.
It includes accessories and has dual ball bearings and metal gearing.

TGY-MG959 spec.
Control system: +pulse width control 1520usec neutral
Required pulse: 3-5V peak to peak square wave
Operating voltage: 4.8V
Operating temperature range: -20~+60C
Operating speed: 0.2sec / 60 degree at no load
Stall torque @ 4.8V: 166 oz/in. (12.0kg.cm)
Stall torque @ 6.0V: 200 oz/in. (15.0kg.cm)
Operating angle: 45 deg. one side pulse travelling 400usec
Direction: Counter clockwise/pulse travelling 1520-1900usec
Motor type: Coreless motor
Potentiometer drive: Indirect drive
Bearing type: Dual ball bearing
Gear type: All metal gears
Connector wire length: 12in
Dimensions: 40.2 x 20.1 x 36.8mm
Weight: 2.64oz. (75g)

 

*Not soft extruded alloy that is later finished to look like it was milled from a billet. (common practice by Align & other helicopter, servo and car factories that make "CNC" alloy parts)

  • Servo Torque(kg)(min. 0.01kg) 15.00
  • Servo Speed (Sec/60deg) 0.20
  • Servo A(mm) 43.00
  • Servo B(mm) 40.00
  • Servo C(mm) 38.00
  • Servo D(mm) 20.00
  • Servo E(mm) 55.00
  • Servo F(mm) 26.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

CARLOS | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 20, 2013

They have good power , are beautiful and cheap.
But they are not water resistant at all, very bad sealed, are very noisy ,and the front pinion is too weak and break easily on any small crush.- I think they are recomended for crawling only , but not for running cars.- My opinion.

kewood | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 10, 2012

After reading through all the reviews, most find these servo's are excellent others claim jittering and not centering very well, my findings were excellent when first fitted into a heavy model plane, ailerons started to jitter replaced these and then elevator started to jitter only control surface still fitted after about 20 flights is a pair in pull pull for rudder had 9 of these fitted to an extra 330 and had to remove 6 of these, I have a powerboard fitted and running all servo's on 5.1V they have plenty of current available are their any solutions to this jittering developing problem, it is a very impressive alloy servo has good gearing and mechanically very well built, it is a shame the electronics let it down.

kewood | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 04, 2012

Maybe this review is closed, but will try again, had 9 of these fitted to large scale plane using a powerboard dual redundant battery setup voltage set at 5V with ample current available, they all started out ok, then developed centering flutter, contstant jitter, many others have reported this, has anyone discovered a solution they are a very nice alloy digital servo excellent machanics but electrically very disappointing, any advise appreciated.

kewood | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

I, Like many others are very disappointed with such a lovely looking alloy servos really looks first class, but, simply they start off good and then develope centering and flutter problems, have 9 of these fitted to a large plane and had to eventually remove the lot as they got so bad, the gears and mechanism are first class, the electronics let it down, mine is set up with a powerboard with a regalated power supply of 5V and planty of current available, any ideas of fixing the jittering would be appreciated.

kewood | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

Be warned if using these on planes they start off good then devolope centering problems, jitter or flutter of all control surfaces, very dangerous, on big planes using multiple servos on control surfaces, using a powerboard adj to 5 volts, so no issues with voltage or current and a dual battery setup. speed and torq are very good and gears and construction are excellent reason for purchasing these, the fluttering is the only disappointment, have had to remove all 9 from my plane, I read many others have experienced same results are their any suggestions to fix up such a nice looking servo's electronics.

gbanger | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2012

I have been running 4 of these in a 140 size 2 meter Sukhoi for 12 months and after more than 300 flights, they are working faultlessly.

Thanks HK, a magic servo at a terrific price.

Chris | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 10, 2012

I think next time you get these in stock you should order more than 30 units, they didn't last long this time and I missed out after waiting 6 weeks! ugh.

capito | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2012

Estes servos so muito fortes, rpidos e resistentes pois o corpo deles confeccionado em um bloco slido de liga de alumnio muito bom j usamos vrio em helicpteros principalmente para rotor de cauda.

kewood | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2012

These servos are very good, use 9 in a heavy model Extra 330L plenty of torq way in excess for unlimited Aerobatics, speed is very good you will have to use these via a power box to get full current don't go over 5V and they will last, or use a bec, have a look inside you will not get a better Servo for this price.Digital and Coreless motors.

Max | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2012

I have used this servo for more than 6 months now. What can i say. It has always worked perfectly. It has plenty of torque and speed BUT in order to achieve this you need A POWERFUL BEC! My old ESC used a 5v BEC and when i switched to my new one with 6v BEC, the servo felt like a different one! I believe this is the best servo for the price. PLEASE DO correct me if i am wrong!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!