Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Min Power Distributor Eco (Green)

Generating Links

Turnigy Min Power Distributor Eco (Green)

Price:

Now save save $0.00 $0.00

$35.97
QTY:
Shipped From:
  • USA
  • Global
  • EU
Already Purchased
Status:
In Stock
SKU:
373000001
want FREE shipping? Click here to find out more!

Turnigy introduce the Min Power Distributor (Green) suited to 20cc plus gas powered models.

This unit has great features, which include: Dual battery input to increase reliability, 8 channel RX input with dual outputs on each channel - simplifying dual servo control surfaces.

This is the first Power Distributor system to securely nest the receiver within the power distribution 'block' thereby shortening cable runs, adding protection to your all important receiver & speeding set up time.

Note: This Power Distributor passes battery input voltage to all connected devices

Features:
• 8 input channels
• 16 output channels
• 3 Status check LEDs
• Padded receiver tray & Secure mounting

 


Specs:
Input channels: 8
Output channels: 16
Input voltage: 5-6V
Max output load: 30A
Output voltage: Input voltage pass through
RX power: Input voltage pass through
Working temperature: -20 to 85 degrees c
Weight: 84g
Dimensions: 116mm x 88mm x 13mm

  • Turnigy Power Box UBEC
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Woolley | Verified Buyer

  • Quality
  • Overall
  • Value

Very happy with service

Feb 10, 2022

Nice item

momis54 | Verified Buyer

  • Quality
  • Overall
  • Value

SKU: 373000001

Sep 19, 2020

oggetto ancora non testato,ma penso che comunque e' un buon prodotto

Graham | Verified Buyer

  • Overall
  • Value
  • Quality

Good but not fully isolating long term

Feb 13, 2019

I have got three of these and over the recent winter months left two of them in models connected to LiPos. When I came to take them out recently the LiPos were all completely discharged. Clearly the MOSFET switch on the board does not fully isolate and while it may be only microamps of drain over a long period they will discharge the batteries.
Now before everybody jumps down my throat I know you should disconnect batteries when putting models into storage, I didn't and I accept the consequences. I am just trying to stop others suffering the same problem.
It wouldn't hurt to include a note about it in the instructions as well.

Hurley | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Sep 06, 2014

I have alot of these and will buy more as needed. I can go on and on on on on on on on on on on on on on on on and on. But why I have done reviews and this and you can look them up. they are just up the page.. Lol

Satho | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 27, 2014

I*m using 2S Lipos with two bec`s. If someone won`t using bec`s , that means only battery it`s possible to try LiFePo by 6,6V. It works by that voltage without problems by using all servo channels.(constant 6V)

Hurley | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 21, 2014

I have about 6 of these. and have not had one problem with them. I do put different plugs on to them. And I get lighted switches for them off ebay ( DUALSKY Fail safe switch(flag/pin style). Really nice switches too.

Dangaras | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 17, 2013

Great product for larger electric models! Helps tidy up the deck of a large model and gives extra sets of servo connections without having to use Y-cables. Really like the multiple power connectivity options. However, there is an issue, the layout means Spektrum receivers have to lay face down because the order of the pins 1 to 8 is backwards. Male to Male extensions are required to connect the RX to the distribution header but are not provided, that is a definite miss.

Hurley | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 18, 2013

I think for that it is, its just not worth the money. because they expect you will use a regulator. In less you just use 6V battery's and make ends for it. If you are going to use a nitro motor then this may be ok for some, but not most( because of the weight). And if you are going to use a gas motor, get the red one( It has a built in kill switch and a ubec for the RX). I bought two green and one red the first time. I have sold the green and got more red ones. I give the value 5 stars just so they didnt delete this.

jaccies | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 17, 2012

I disassembled the unit, so i uploaded the schematic see Files section.

2 batteries in parallel is very bad you dont want more current , we want if one battery getting unloaded to much or defective that the other battery will take over, so i will add schottky diode in series with every battery . so that battery 1 will provide 6V and the battery 2 will provide 5,5V as a backup feature if battery 1 is unloaded to much or fails.

rappa | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 14, 2012

very good product for the money!!!!!!

  1. 1
  2. 2
Customer files
Min Power Distributor ECO Green schemat Download [129]
Schematic Min Power distributor ECO gree Download [25]
Schematic Min Power distributor ECO gree Download [25]
Instructions Download [69]
Oem Manual Download [217]
Printed circuit modification Download [378]
Modified Board.JPG Download [368]
Modifying the...pdf Download [256]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!